CallingSYS ZJ-49PC User Manual - page 7
Before
do the pairing, please refer to (8) "Cd8" to set the working mode. Such as normal
restaurant
mode, area mode, room mode or hospital mode.
Press
"SET" button to enter "Cd7" submenu. The display will show "001", then press
"UP/DOWN" to select the number of calling transmitter.
① Pair calling transmitter
Press “UP/DOWN” button select one of the number, for example “001”, and then press any
button on the transmitter, the speaker will sound “successful registration” and the display
screen turn to next number “002” automatically. Then you can continue to do the next pairing up
to number 999 transmitter (normal mode). After finish the pairing, press “BACK” button to
previous menu or quit to standby status.
Note: 1) long press “UP/DOWN” button to jump the numbers quickly.
2) While the number is paired, the last digit is “H”, or not, if the digit is “-”, it means the
number has no paired transmitter.
3) In area mode, the first digit of three is the area, it can show 6/7/8/9/A/b/C/d/E/F, the last
two digits means the number from 01 to 99 in one area, press “UP/DOWN” button to
select suitable area and number.
4) In room or hospital mode, the first two digits means the room number from 01 to 99,
the last one digit means the desk/bed number in one room from 1 to 9, press
“UP/DOWN” button to select suitable room and number.
② Delete calling transmitter
Press “UP/DOWN” button select one of the number which want to delete. For example number
003, the display shows “003H”, “H” means this number has transmitter paired. Then press
“DEL” button, the LED indicators will be off which means the number 003 transmitter is deleted.
③ Pair the manager remote
The manager remote is optional, when need it, please pair it to number 000. Then you can use
the button on remote to replace the button on the receiver host.
(8) "Cd8": Working mode setting
Press
"SET" button to enter "Cd8" submenu. The display will show "0", then press "UP/DOWN"
to select the working mode from 0 to 4.
0: screen display 001~999, sound “Dingdong+No. 001 call”
1: screen display A01~F99, sound “Dingdong+A area+No. 01 call”
2: screen display 001~999, sound “No. 001 CALL”
3: screen display 011~999, sound “Dingdong+apartment 01+No.1 call”
4: screen display 011~999, sound “Dingdong+apartment 01+No.1 emergency call”
Note:
After finish the function, please power off and restart the host to ensure the
function is confirmed.
(9) "Cd9": Time setting
Press
"SET" button to enter "Cd9" submenu. The display will show "2001", then press
“UP/DOWN” to set the year. After that press “SET” button to enter month setting. In the same, set
the day/hour/minute/week parameters.
(10) "Cd10": Restore the factory default setting
Press
"SET" button to enter "Cd10" submenu. The display will show "no", then press
"UP/DOWN" to select restore function.
No: don’t do restore function
PAt: restore the default expect “number registration” setting.
ALL: All the settings will be restored to default settings like below:
1) Cd1: 00 (number speaker)
2) Cd2: 15 (volume is 15 level)
3) Cd3: 000 (no records display cycle)
4) Cd4: 040 (auto delete records time is 40s)
5) Cd5: 000 (no timeout prompt)
6