CallingSYS ZJ-49PC User Manual - Packing List
Packing List
FAQ
Optional for transmitter
Notice
Name
Quantity
Receiver host
Power adaptor
User manul
Warranty card
1 pcs
1 pcs
1 pcs
1 pcs
1. While it is working, please pull the antenna out for the best receiving effect.
2. For using of computer software, please refer to user manual of computer software.
Problems
Reasons
Solutions
While power on, the receiver host
has no response.
The power adaptor is broken.
Change the power adaptor.
The signal of some transmitters is
not enough.
The power of battery is low.
Change the battery.
Receiver host cannot get some
transmitters of them.
These transmitters are deleted.
Pair these transmitters again to
the receiver host.
No voice prompt while power on
or calling.
The volume is lowest.
Adjust the volume louder.
1-button mode: YK500-1E/F, YK1000-1C, YK200-1C, TSYK200-1, YK500-1H
2-button mode: YK1000-2C, TSYK500-2X, YK500-2H, TSYK1000-2X
3-button mode: YK500-3H
4-button mode: YK500-4X, YK500-4H, TSYK1000-4B, TSYK1000-4X,
TSYK2000-4X
6-button mode: TSYK500-6
7
6) Cd6: 5 (4 key mode)
7) Cd7: 001- (no paired transmitter)
8) Cd8: 0 (normal mode)
9) Cd9: 2013 (time setting)
10) Cd11: 0 (timekeeping off)
Select one option and press “SET” button, after 3s the host will restore to default settings and turn
back to standby status automatically.
(11) "Cd11": The whole point timekeeping setting
Press
"SET" button to enter "Cd11" submenu. The display will show "0", then press “UP/DOWN”
to set whether open the timekeeping function, “0” meas off, “1” means on.