Camatel NetVito 5300 Series Quick Start Manual - page 4
2
Ethernet Installation
Make sure that your computer has an Ethernet port.
If your computer doesn't have an Ethernet adapter,
you need to install an Ethernet adapter with the help
of the Ethernet adapter manufacturer's installation
instructions.
Connect the ADSL modem
1. Connect the Ethernet cable (RJ45) to the Ethernet
port (yellow) on the ADSL modem.
2. Connect the other end of Ethernet cable (RJ45) to
the Ethernet port on your computer.
3. Plug the DSL cable (RJ11) into the DSL port (gray)
on the ADSL modem.
4. Plug the other end of the DSL cable (RJ11) into the
phone jack.
5. Plug the power adapter into the power outlet and
the ADSL modem (black port).
6. Power on the ADSL modem (power switch located
on right side of back panel).
RJ45 Ethernet cable
connect to computer
RJ11 DSL cable
Internet Connection
Power adapter
Switch or Router
Optional:
RJ45 Ethernet cable
can be connected to
a switch or router