Camatel NetVito 5300 Series Quick Start Manual - Router Configuration
3. Select
Using DHCP server from the Configure
drop-down menu.
4. Close window and save changes.
5. If you have a router, configure the router using the Router
Configuration procedure that follows.
Router Configuration
1. Start your web browser.
2. In the Address box, enter the following:
192.168.254.254
3. When prompted for a user name and password, type
admin for the user name and admin for the password.
4. Click
OK to enter the Quick Start page of web interface
from modem.
5. Type the user name and password provided by your
Internet service provider.
6. If additional configuration is desired, select
Status to view
modem's status and statistical information, select
Advance
to configure DHCP, IPv6 LAN, Virtual Server, Firewall, NAT
ALG, QoS and so on, select
Management to set up modem
itself.
Folllow the procedure below for OS9:
1. Click
Apple > Control Panels > TCP/IP.
2. Select
Ethernet from Connect via drop-down menu.