Camatel NetVito 5300 Series Quick Start Manual - Internet Access
Internet Access
Router Configuration for your modem comes with
PPPoE firmware:
1. Start your Web browser.
In the Address box, enter the following:
192.168.254.254
3. When prompted for a user name and password,
type
admin for the user name and admin for the
password.
4. Click
OK to enter the Quick Start page of web
interface from modem.
5. Type the user name and password provided by
your Internet service provider.
6. If additional configuration is desired, select
Status
to view modem's status and statistical information,
select
Advance to configure DHCP, IPv6 LAN,
Virtual Server, Firewall, NAT ALG, QoS and so on,
select
Management to set up modem itself.
Bridge Configuration for your modem comes
with PPPoE firmware:
Option 1 - If Advanced page has Bridge mode,
simply select it, the modem will automatically
change to bridge mode.