Camatel NetVito 5300 Series Quick Start Manual - Windows Configuration
Other manuals for NetVito 5300 Series:
Quick Start Manual
Manual is about: ADSL2+
of
12
3
PC Configuration Procedures
Windows Configuration
In order to setup ADSL modem, your PC must first
be configured to obtain an IP address from a DHCP
server. Follow the procedure below:
1. Click
Start > Control Panel.
2. Double-click the
Network Connections icon.
3. Double-click your
Network Card.
4. Click
Properties.
5. Select
Internet Protocol (TCP/IP).
6. Click
Properties.
7. Select
Obtain an IP address automatically.
8. Select
Obtain DNS server address automatically.
9. Click OK and exit out of the Control Panel.
10. Configure Internet Access using the procedure
that follows.