Camatel NetVito 5300 Series Quick Start Manual - Roter Configuration
Other manuals for NetVito 5300 Series:
Quick Start Manual
Manual is about: ADSL2+
of
12
3. Select
Using DHCP server from the Configure
drop-down menu.
4. Close window and save changes.
5. If you have a router, configure the router using the Router
Configuration procedure that follows.
Roter Configuration
1. Start your web browser.
2. In the Address box, enter the following:
192.168.254.254
3. When prompted for a user name and passoword, type
admin for the user name and admin for the password.
4. Click
OK to enter the Quick Start page of web interface
from modem.
5. Type the user name and passowrd provided by your
Internet service provider.
6. If additional configuration is desired, select
Status to view
modem's status and statistical information, select
Advance
to configure DHCP, IPv6 LAN, Virtual Server, Firewall, NAT
ALG, QoS and so on, select
Management to setup modem
itself.