- DL manuals
- Cambridge Audio
- Speakers
- incognito AS10
- Installation Manual
Cambridge Audio incognito AS10 Installation Manual
Summary of incognito AS10
Page 1
As10 a-bus active ceiling speakers installation guide.
Page 2
2 incognito active ceiling speakers introduction ................................................................................................3 preparing the location ................................................................................4 mounting the as10 .................................
Page 3
As10 a-bus active ceiling speakers incognito active ceiling speakers 3 as10 a-bus active ceiling speakers thank you for purchasing these cambridge audio incognito as10 a-bus tm active ceiling speakers. Incognito is a cost-effective, modular based system using standard cat-5 or cat-6 cable to distrib...
Page 4
4 incognito active ceiling speakers it is advisable to plan all aspects of installation in advance of work beginning, preferably with the house/flat building schematics if available. Great care should be taken to ensure that all building regulations are followed. If in doubt consult an expert. When ...
Page 5
As10 a-bus active ceiling speakers incognito active ceiling speakers 5 before mounting, ensure that the four fixing screws are slackened off so that the red mounting dog-legs can move freely. Move each red dog-leg foot to the left into it’s holding slot, and then insert the speaker into the mounting...
Page 6
6 incognito active ceiling speakers as10-a rear connections 1 – connection to ah10 or a-bus ready/incognito ready socket via cat-5/5e cable 2 – optional independent local power socket 3 – stereo/mono jumper (cn17) 4 – local input 5 – preamp output 6 – stereo/mono jumper (cn14) 7 – cat-5e connection ...
Page 7
As10 a-bus active ceiling speakers incognito active ceiling speakers 7 1. Using a single cat-5e cable, connect the as10-a to the ah10/vh10 via an rj45 plug at the ah10, and the 8-way colour-coded punch- down connection at the as10-a (see wiring guide below opposite). The rj45 hub connection should b...
Page 8
8 incognito active ceiling speakers the as10 s are operated via the lr10 which is a learning remote control capable of controlling not only the as10 but also the source equipment. 1. Local switches to local input (where fitted). 2. Cctv selects cct v source on the vh10 if fitted. 3. Select see oppos...
Page 9
As10 a-bus active ceiling speakers incognito active ceiling speakers 9 sound adjustment functions adjust treble level using volume buttons during sound adjustment tones are generated to indicate position within the available range: a single medium frequency tone indicate a neutral setting. Two risin...
Page 10
10 incognito active ceiling speakers local source input it is possible to install a piece of source equipment to be used local to the room that contains the as10. This might be a games machine or cd player in the bedroom, for example. There are two ways of connecting a local source: incognito lm10 w...
Page 11
As10 a-bus active ceiling speakers incognito active ceiling speakers 11 as10-a jumper settings fader turns fader function on and off. See page 9 for details. Local switches between lm10 local and as10 onboard option. See page 10 for details. Incognito/a-bus switches between incognito enhanced mode f...
Page 12
12 incognito active ceiling speakers there is no sound ensure that the amplifier is set correctly. Check that the interconnects are inserted correctly. The sound is distorted or garbled check aerial connections and placements. There is a hum coming from the speaker ensure that all cable connections ...
Page 13
As10 a-bus active ceiling speakers incognito active ceiling speakers 13 cambridge audio warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below). Cambridge audio will repair or replace (at cambridge audio’s option) this product or any defectiv...
Page 14
Incognito as10 www.Cambridge-audio.Com part no. Ap17796/1.