Cambridge Audio incognito AS10 Installation Manual - page 12
12
Incognito active ceiling speakers
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
The sound is distorted or garbled
Check aerial connections and placements.
There is a hum coming from the speaker
Ensure that all cable connections are secure.
There is unwanted background noise and interference
Move the tuner or other source away from electrical equipment that is
likely to cause interference.
The remote handset will not function
Check that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
SPECIFICATIONS
TROUBLESHOOTING
Frequency response
60Hz–20 kHz (
+
/- 2dB)
THD
Signal/Noise ratio
80 dB
Input impedance (local input)
33 K Ohms
Volume control range
0 to -78 dB in 31 steps
Treble control range
+
/- 14dB @ 20kHz, in seven 2.5dB
steps (cut and boost)
Bass control range
+
/- 14dB @ 100kHz, in seven 2.5dB
steps (cut and boost)
Balance control range
+
0/- 17.5dB @ 20kHz, in seven 2.5 dB
steps (L and R)
Fader control range
+
0/- 17.5dB @ 20 kHz, in seven 2.5dB
steps (front and back)
Pre-amp output
Variable, following volume setting
IR passthrough
34–40kHz and 54–58kHz
frequencies supported
Speaker impedance
4 Ohms
Power requirement
+24V DC @ 1A max from hub
Weight (AS10-A)
1.4kg / 3.1 lbs
Weight (AS10-P)
1.1kg / 2.4 lbs
Dimensions
240 x 75 (mm), 9.4 x 3 (inches)
The crossed-out wheeled bin is the European Union
symbol for indicating separate collection for electrical
and electronic equipment. This product contains
electrical and electronic equipment which should be
reused, recycled or recovered and should not be
disposed of with unsorted regular waste. Please return
the unit or contact the authorised dealer from whom you
purchased this product for more information.