CAMBRIDGE CSW-15AT Installation, Setup And Operation Instructions - page 9
9
2.2 Scale Menu Definitions Continued:
S11 Zero Delay 0 to 99 updates. The weight display must be within thezero band for the
selected number of updates to be considered zero. 4 (Default)
S12 Zero 0 0.5 divisions.
Tracking (1) 1 division. (Default)
2 3 division
Press the right arrow key to enter. Use the up and down arrow keys to make
the desired selection (0, 1, or 2), then press the
PRINT/ENTER
key to save
and exit. S12 will be displayed.
S13 Tracking 0 to 99 updates. The amount of time that the display within the allowed
Delay graduations before it will automatically be zeroed. 10 (Default)
S14 lb/kg (lb/kg): allows the indicator to be switched between pounds and kilograms
By pressing the
lb/kg
key
LB: This sets the display to pounds only.
Kg: This sets the display to Kilograms only.
S15 Scale ID 1 to 99 Scale ID used in RF link output. 1 (Default)
S16 Brightness 0 to 15. Adjusts the LED display intensity where 15 is the brightest. 15
(Default)
S17 Sleep Mode 0 to 30 minutes. The display will turn off after the set timeelapses with no
scale activity. 0 (Default).
S18 Angle Limit 1 to 9 Degrees. 6 (Default).
END Exits back to the main menu
( ) indicates factory set defaults unless otherwise specified.