Camco 43421 Installation Instructions Manual - (Continued)
3. Locate Template #1 and find proper hole set by matching letter from Overhang
Measurement Tool (see Step 1). For example: If overhang is 7/8"; corresponding
letter is “C”—use holes aligned with “C” on Template #1.
With a nail or pen, carefully punch through both corresponding holes (see Figure D).
4.haveassistantholdextensionupsoyoucanworkunderit.hold
Template #1squarelyagainstcabinetwithtopedgetouchingbottom
ofoverhang,centeringpilotholeswithpianohinge.Toposition
correctlyon5/8"overhang,slidetemplatebehindhinge.
5.CarefullymarkcabinetthroughholesfromStep3.Thesewillbe
pilotholelocationsforsupportbracket(Figure E).
Example:IfoverhangisclosesttoLineC(7/8")onOverhang
MeasurementTool,useholesetConTemplate #1.
NOTE:Ifyouprefernottousethetemplatesprovided,overhangand
cabinet side dimensions are listed in Figure F at left. Measure
overhang and find closest listed dimension on chart. Move across to
corresponding side measurement. Using side dimension, measure
downfromtheoverhangandmakeapencilmark.(Do not include
hinge thickness in measurement.)Placesupportbracketsoyoucan
seemarkthroughoneofthescrewholes.Makemarksthroughboth
screwholes.Thesewillbepilotholelocations.
Section A - Countertops with Overhang
(continued)
D
E
F
2
G
H
5/8"..............................2-3/4"
3/4"..............................2-13/16"
7/8"..............................2-5/8"
1".................................2-7/16"
1-1/8"...........................2-17/32"
1-1/4"...........................2-7/16"
1-3/8"...........................2-13/32"
1-1/2"...........................2-9/32"
1-5/8"...........................1-29/32"
1-3/4"...........................1-13/16"
1-7/8"...........................1-25/32"
2".................................1-23/32"
Overhang Side
6.Using3/32"drillbit,drillpilotholesonbothmarks
(Figure G).
Withflatsideofsupportbracketfacingdown,attach
bottomofsupportbracket(longersection)tocabinet
side with screws provided (Figure H).
NOTE:Longersectionofsupportbracket(bottom)must
be installed on cabinet base.
A-
B-
C-
D-
E-
F-
G-
H-
I-
J-
K-
L-