Camco 43421 Installation Instructions Manual - (Continued)
3
Section A - Countertops with Overhang
(continued)
7.haveassistantholdextensionoutwardsoitislevelwith
countertop (Figure I).Thisisthe“inuse”position.
8.Withhingeextended,movesupportbracketupwardsotop
(shorterside)makescontactwithextensionboard.Maketwomarks
forpilotholesthroughthesupport’sscrewholes.
9.Carefullydrillpilotholeswith3/32"drillbit.
Recheck masking tape on drill bit (3/8" depth)
so you do not drill through the extension.
10.Completeinstallationbyattachingtopofsupportbracketto
extensionwithscrews.Checkforproperoperation(Figure J).
Section B - Countertops with No Overhang
1. Determine mounting location and have assistant hold extension in
place (Figure K). Unfold piano hinge so it rests flat against side of
cabinet.Makeapencilmarkoncabinetatthebottomofpianohinge.
2.Usingstraightedge(preferablyacarpenter’ssquare)drawaline
throughmarkmadeinStep1paralleltocountertopedge(Figure L).
Checktobesurethelineisparalleltocountertop.
haveassistantagainholdextensionagainstmountinglocation.
Positionextensionsothatbottomofpianohingerestsonline.Make
pencilmarksthroughpianohingeforpilotholelocations.
3. Drill pilot holes with 3/32" drill bit and attach extension to cabinet
with screws provided.
4. Locate Template #2. Using a nail or pen, carefully punch
through the two pilot hole locations (Figure M).
I
K
L
J
M