CAME A 3024 N Installation Manual - page 2
2
ENGLISH
Th
e data and inf
or
m
atio
n s
hown in this manual ma
y be changed b
y
C
A
M
E cancelli automatici s.p
.a
. at an
y time w
itho
ut pr
io
r war
ni
ng.
Control board power supply: 230 A.C. 50/60Hz
Motor power supply: 24V D.C. 50/60Hz
Max draw.: 10A
Power: 120W
Opening time (90°): adjustable
Gear ratio: 1/36
Duty Cycle: Intensive use
Protection Rating: IP44
Weight: 10 kg
Operating temperature
4.1 Gearmotor
This product is engineered and manufactured by CAME CANCELLI AUTOMATICI S.p.A. and complies with current safety regulations.
Guaranteed 24 months if not tampered with.
The gearmotor is composed of two, cast aluminium half shells inside of which rest the gearmotor and endstops – with electro
blocking – and an endless screw, epicycloidal gear reduction system.
4 Description
2.1 Intended use
1 Legend of symbols
This symbol tells you to read the section with particular care.
This symbol tells you that the sections concern safety issues.
This symbol tells you what to say to the end-users.
2 Intended use and restrictions
The ATI 24V N gearmotor is specifi cally engineered to automate residential and condominium swing gates, even under intensive
use.
3 Reference Standards
“IMPORTANT INSTALLATION, SAFETY INSTRUCTIONS”
“CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY”
“THIS MANUAL IS ONLY FOR PROFESSIONAL OR QUALIFIED INSTALLERS”
2.2 Restrictions
The use of this product for purposes other than those described above and installation executed in a manner other than as instructed
in this technical manual are prohibited.
4.2 Technical features
The company: Came Cancelli Automatici is ISO 9001:2000 quality certified; is has also obtained the ISO 14001 environmental
safeguarding certification. Came engineers and manufactures all of its products in Italy.
This product complies with the following standards: see declaration of compliance.
4.3 Description of parts
1
2
3
4
1) Operator
2) Front bracket
3) Back swivel-joint
4) Back bracket
#
#