CAME GARD 4 SERIES Installation manual - page 4
Pa
g
e
44
- M
an
u
al
c
od
e:
11
9
G
U
5
5
11
9
G
U
5
5
ve
r.
1.
1
1.
1
0
1/
2
0
12 © C
A
M
E c
an
ce
lli auto
m
ati
ci
s.p.a. - T
h
e d
ata a
n
d i
nf
or
m
ati
on
in
th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny tim
e a
n
d w
ith
ou
t o
b
lig
ati
on
o
n th
e p
art of C
am
e C
an
ce
lli A
uto
m
ati
ci
S
.p.a. to n
otify s
ai
d c
h
an
g
es.
ENGLISH
This symbol shows parts which must be read with care.
This symbol means the parts which describe safety issues.
This symbol tells you what to tell the end-user.
GARD 4 is engineered and built by CAME CANCELLI AUTOMATICI S.p.A. in compliance with current safety code.
The cabinet is made of galvanised, epoxy powder-coated 2.5 m thick steel sheeting, or of satinated AISI 304 staniless steel 2 mm thick.
Inside there is a gearmotor and all of the mechanical moving parts. The control panel is housed in the upper dome.
Designed around the anti-shearing dsafety function, it is fi tted with safety contacts in the hatch lock and in the emergency release lock. .
The operators comes in two versions:
001G4040Z - Automatic barrier made of galvanised epoxy poweder-coated galvanised steel with a 24V D.C. powered gearmotor complete
with control panel;
001G4040IZ - automatic barrier made of satinated AISI 304 stainless steel with a 24V D.C. powered gerarmotor complete with control pa-
nel;
The following accessories are complementary to the GARD 4 operator:
001G03750 - Semi-rounded aluminium white-varnished barrier arm, 4 m long complete with transparent bottom cover-strip and anti-
impact profi le1 ;
001G03752 - Rounded alumiium white-varnished barrier arm, 4 m long comlete with transparent botton cover-strip;
001G03753 - Attachment fl ange for rounded barrier-arm;
001G02040 - Balancing spring Ø40 (yellow);
001G04060 - Balancing spring Ø50 (green);
001G06080 - Balancing spring Ø55 (red);
001G03756 - Internal reinforcement for the G03750 semi-rounded barrier;
001G03755DX - Joint for semi-rounded barrier arm for right-hand barriers;
001G03755DX - Joint for semi-rounded barrier arm for left-hand barriers;
002LB38, - Electronic card for connecting three 12V-6Ah batteries ;
The following accessories are optional on the GARD 4 operator;
001G02801 - Flashing dome-light.
001G02802 - Support for applying the DIR photocell onto the cabinet (cannot be used for barriers fi tted with swing skirt and/or swing
rest;
001G03751 - Emergency battery housing support
001G028401 - Luminous cord to signal movement;
001G028 402 - Luminous cord connecting cable;
001G02807 - Fixed support;
001G02808 - Swing rest;
001G02809 - Package of 20 red refl ective adhesive strips;
001G0465 - Swing skirt made of 2 m-long aluminium modules;
WARNINGS!
001G02802 Cannot be used with with barriers with 001G0465 skirt and/or 001G02808 swing leg support
001G02808 For passage widths of up to maximum 3 m.
001G03756 - MUST use on barriers with passage widths exceeding 3 m or with the 03756G3 luminous cord.
MUST use on barriers with passage widths exceeding 2.5 m or with 001G02808 swing leg support or with 001G0465 skirt.
001G02807 For passage width wider than 3.5 m use of the fixed support is mandatory.
001G0465 - 001G02808 Cannot be used together.
Important! Make sure that the command and safety equipment and accessories are CAME originals; this will ensure easy installation and maintenance
of your system.
Passage width is up to 3.75 metres and opening time is between 2 to 6 seconds.
Came Cancelli Automatici employs an ISO 9001:2000 certified quality management system and an ISO 14001 environmental manage-
ment system. Came entirely engineers and manufactures in Italy.
This product is compliant with: see statement of compliance.
Legend of symbols
Intended use and limits to use
Intended use
Limits to use
Legislative references
Description
BARRIER automatic GARD 4 is " for l’ in PARKING FACILITIES or public, in areas residential or in zones intensive.
Every installation and use other than that specified in this manual is forbidden.