Camos CM-709M2 Instruction Manual - page 10
6
MIRROR SET
CAM1 MIRROR
CAM2 MIRROR
CAM3 MIRROR
CAM4 MIRROR
AV MODE DOWN/UP MENU POWER
CAM1
CAM2
CAM3
CAM4
VOLUME 30
AV MODE DOWN/UP MENU POWER
PORON TAPE
VELCRO TAPE
NOTICE
⑤
⑥
⑥
TAPPING SCREW T1 M4.0 X 12 (3ea)
INSERT BOLT (2ea)
FLAT WASHER M3 (4ea)
18
19
CAMERA Mirror/Normal mode setting
8
Screen Information
7
Press MENU button of monitor or RECALL button of remote control, then it displays
actual screen information (Input mode / Audio output / Volume).
1) Press SETUP button of remote control
(or MENU button of monitor) to go into
OSD MENU [MIRROR SET].
2) Move to a camera which by pressing
▼button of remote control (or MODE
button of monitor) then choose by
pressing ◀▶button (or DOWN/UP
button of monitor).
※ It is set MIRROR mode from the factory.
7” 4CHANNEL DIGITAL MONITOR
CONNECTING AND INSTALLATION
(1) Clean the place where to install stand and install stand firmly after remov-
ing protect tape of stand bottom.
(2) Fix the stand with enclosed screws.
(3) Assemble the monitor to stand and fix it in the right angle.
(4) Connect cable as follows.
※ Installation can be changed as user’s pleasure. (Sunvisor – Option)