Camos CM-709M2 Instruction Manual - page 6
AV MODE DOWN/UP MENU POWER
AV MODE DOWN/UP MENU POWER
AV MODE DOWN/UP MENU POWER
CAM1
CAM2
CAM3
CAM4
→
→
→
→
AV MODE DOWN/UP MENU POWER
AUX1
AUX2
• Split screen
SPLIT SCREEN SETUP
SET LEFT SIDE
SET RIGHT SIDE
CAM3
SELECT INPUT
CAM1
CAM2
CAM3
CAM4
AUX1
AUX2
10
11
2 SPLIT
2 SPLIT
3 SPLIT
3 SPLIT
4 SPLIT
H 4 SPLIT
To choose the OSD MENU [SETUP] on each split mode, press menu button of moni-
tor or SETUP button of remote control.
3) SPLIT mode
CHANGE SPLIT MODE
5
Each split screen has two options. On split mode, press DOWN/UP button of moni-
tor or split screen button of remote control then the screen switches between both
options.
CHANGE INPUT
6
On split or AV mode, press ▲ button on remote control (or UP button of monitor)
then it will change camera input of CAM1~CAM4 as below order.
※ In case of press ▼button on remote control then it changes in reverse order. To
use the monitor button, go into full screen by pressing M(MODE) button and
use DOWN/UP button.
1) Camera mode
On camera mode, press AV button of monitor or remote control then the screen
goes to AV mode directly.
2) AV mode
User can change camera mode on each split screen. Press M(MODE) button of
monitor or DOWN/UP button of remote control and choose a Camera.
Notice
※ It is same way for every split screen mode.