Can-Am Renegade 500 Operator's Manual - page 71
1
V07I07Y
2
TYPICAL
1. Override button
2. Engine stop switch
8) Multifunction Gauge
This vehicle is equipped with an elec-
tronic multifunction gauge.
The functions on this gauge are:
vmr2007-050-002_l
1. Multifunction display selector button
2. Transmission position display
3. Multifunction display
4. Fuel level display
5. 4WD indicator lamp
6. Low fuel level indicator lamp
7. Check engine indicator lamp
8. High beam indicator lamp
9. MPH, km/h indicator lamp
10. Flasher/hazard signal indicator lamp
Unit Selection (MPH vs km/h)
The speedometer, odometer and trip
meter are factory preset in miles but
it is possible to change them to kilo-
meter reading. Contact an authorized
Can-Am dealer.
Multifunction Display
(normal display mode)
After vehicle startup, the normal dis-
play mode shows either:
– vehicle speed
– engine revolution per minute (RPM)
– both
parameters
simultaneously
(combined mode).
Speed Mode
In this mode, the display shows the
speed of the vehicle either in km/h or
in MPH.
vdd2008-001-084
RPM Mode
In this mode, the display shows the
engine RPM.
vdd2008-001-089
Combined Mode
In this mode, the display shows the
speed of the vehicle and the engine
RPM.
_____________________
69