Can-Am Renegade 500 Operator's Manual - page 94
of
144
TRANSMISSION LEVER IS HARD TO MOVE
1. Transmission gears are in a position that prevents the transmission lever
to work.
– Rock the vehicle back and forth to move the gears in the transmission and
allow the transmission lever to be set.
2. CVT dirty or worn-out.
– Contact an authorized Can-Am distributor/dealer.
THE RPM INCREASES BUT THE VEHICLE DOES NOT MOVE
1. The transmission is on PARK or NEUTRAL position.
– Select the R, HI or LO position.
2. CVT dirty or worn-out.
– Contact an authorized Can-Am distributor/dealer.
3. Water in the CVT housing.
– Contact an authorized Can-Am distributor/dealer.
92
______________________