Canon 9192A006 - FAXPHONE L80 B/W Laser Setup Instructions

Other manuals for 9192A006 - FAXPHONE L80 B/W Laser: User Manual, Software User's Manual
Manual is about: Canon FaxPhone L80: Users Guide

Summary of 9192A006 - FAXPHONE L80 B/W Laser

  • Page 1

    Set-up instructions set-up instructions thank you for purchasing the canon faxphone l80. To get your machine ready for use, please follow the instructions in this document before referring to any other documentation. Unpack the machine and its components. Check that you have the following: note • yo...

  • Page 2: Assemble The Machine.

    Remove the shipping materials from the machine. 1 place the machine on a flat surface. 2 remove all shipping tapes from the exterior of the machine. 3 gently open the operation panel ➊ (it only opens partially) and remove the protective sheet ➋ from the adf. 4 close the operation panel by pressing a...

  • Page 3: Load Paper.

    Load paper. 1 insert a stack of paper into the multi-purpose tray ➊ (print side facing you and top edge first), then adjust the paper width guides to the width of the paper ➋ . 2 attach the multi-purpose tray cover to prevent dust accumulating inside the machine. Attach the handset cradle to the mac...

  • Page 4: Connect The Power Cord.

    Connect the handset and telephone line cord. Connect the power cord. When the power cord is plugged into the machine and into the wall outlet, the machine is turned on. The lcd displays please wait, then put in cartridge. The lcd returns to the standby display when you install the fx-3 s cartridge. ...

  • Page 5

    Install the fx-3 s cartridge. 1 lift the latch and open the front cover. 2 remove the fx-3 s cartridge from its protective bag. 3 gently rock the cartridge from side to side a few times to distribute the toner evenly inside it. •print quality may be poor if the toner is unequally distributed. 4 plac...

  • Page 6: Set The Fax Receive Mode.

    Set the fax receive mode. 1 press function ➊ . 2 press receive mode ➋ . 3 press or ➌ until the mode you want appears in the lcd: ex. You can select from the following: fax/tel mode: when the handset or the extension telephone is connected to the machine, the machine automatically switches between fa...

  • Page 7

    Install the printer driver. (windows 98/me/2000/xp) important • do not connect the usb cable before installing the software. Note • when installing the software in windows xp or windows 2000, log onto the system as a member of the administrator group. • if the found new hardware wizard appears, clic...

  • Page 8

    6 when the system displays messages indicating that the driver for your printer is being installed, proceed as follows: for windows 98/me: wait for the system to complete the installation of the printer driver. For windows 2000: when the found new hardware wizard appears during the setup, choose the...