1. DL manuals
  2. Canon
  3. All in One Printer
  4. Color imageCLASS MF8050Cn
  5. Starter Manual

Canon Color imageCLASS MF8050Cn Starter Manual

Other manuals for Color imageCLASS MF8050Cn: Basic Operation Manual, Starter Manual, Basic Operation Manual
Manual is about: Canon Printer User Manual

Summary of Color imageCLASS MF8050Cn

  • Page 1

    Read this manual first. Be sure to read the manual before using the machine. The remarks for important safety instructions are described in "basic operation guide." read the manual also. Keep the manual for future reference. Starter guide 1 preface next page 2 installing the machine p. 4 3 configuri...

  • Page 2

    2 setting up the machine to suit your purposes available features : available : not available copy print 2-sided printing fax (pc fax) usb scan network scan remote ui adf (1-sided) adf (2-sided) mf8050cn determine which machine functions (copy, print, fax, pc fax, scan, remote ui) you intend to use,...

  • Page 3

    1 confirming the supplied accessories 1. Confirm that all the supplied accessories are contained in the box. If an item is missing or damaged, please contact our canon authorized service facilities or the canon customer care center. The machine unit the following parts are already installed. Paper c...

  • Page 4

    2 user software cd-rom about the drivers and software the drivers and software included in the cd-rom supplied with this machine are as follows. Mf driver printer driver you can print from an application using the machine by installing the printer driver to your computer. You can process print data ...

  • Page 5

    3 about the supplied manual read this manual first. This manual describes the settings for the machine and software installation. Be sure to read the manual before using the machine. Starter guide basic operation guide e-manual read this manual next. This manual describes the basic machine operation...

  • Page 6

    4 2. Remove the packing materials. The packing materials may be changed in form or placement, or may be added or removed without notice. * 1. Carry the machine to the installation site. Carrying the machine to the installation site and removing the packing materials hold the lift handles. Carry the ...

  • Page 7

    5 preparing the toner cartridges open the front cover. Pull out the toner cartridge tray. Close the rear cover. Did you remove all the packing materials? Check! Tape x9 packing materials with tape x3 1. Open the front cover to pull out the toner cartridge tray. Packing materials x2 open the feeder. ...

  • Page 8

    6 3. Push the toner cartridge tray, and then close the front cover. 2. Pull out the sealing tapes of the four toner cartridges. Did you remove all the packing materials? Check! Sealing tape x4 pull out the paper cassette. Remove. Hold down the toner cartridge. Pull out the sealing tape. Close the fr...

  • Page 9

    7 load the paper. When loading legal size paper • hold the lock release lever. Adjust the length of the paper cassette. Be sure that the paper stack does not exceed the load limit mark lines. Check! Push the paper cassette. Hold the lock release lever to slide the paper guides. Slide the side paper ...

  • Page 10

    8 connecting the power cord 1. Turn on the power of the machine. 2. Specify the initial settings. Select with [ ] or [ ], and then press [ok]. Turning the power on and specifying the initial settings press the power switch. Language french spanish portuguese english do not connect the usb cable. Con...

  • Page 11

    You can perform color correction by selecting to obtain optimum copy results or printout results. For details on the procedure, see the following "performing color correction." • adjust image to reproduce original color? No yes press [ok]. Use numeric keys, and then press [ok]. Move the cursor with ...

  • Page 12

    10 setting a paper size and type press [ ] (paper select/ settings). Select with [ ] or [ ], and then press [ok]. Select with [ ] or [ ], and then press [ok]. Select with [ ] or [ ], and then press [ok]. Select with [ ] or [ ], and then press [ok]. Select paper mp tray ltr:plain 2 paper settings 1 p...

  • Page 13

    11 specifying the initial fax settings and connect the telephone cable 1. Register the fax number and username. Enter information into the machine using the following key. Ok c # numeric keys entering letters and symbols enter with numeric keys or [ ] (symbols). Keys to be used entry mode: entry mod...

  • Page 14

    12 2. Set the fax receive mode. The mode is set. → proceed to step 3. Receives a fax automatically. Does not use the telephone.* • • if connecting with the telephone in the auto receive mode, the telephone rings when receiving a fax or telephone call. You can answer the telephone while the telephone...

  • Page 15

    13 3. Connect a telephone line. Press [ok]. Connect phone line. Follow instructions on the next screen. Connect line to a. *next: press ok connect phone line. Follow instructions on the next screen to make connections: 1. Phone line to a displayed screen varies depending on the specified receive mod...

  • Page 16

    14 4. Change the line type. By default, the telephone line type on the machine is set to tone dialing. If you use tone dialing, skip the following procedure. If you use pulse dialing, follow the procedure below and change the telephone line type setting on the machine to pulse dialing. If you do not...

  • Page 17

    15 selecting a method for connecting the machine to a computer 1. Connect the lan cable. Network connection and configuration for network connection • for usb connection • network connection and configuration p. 15 installing with usb connection p. 18 connect the cable. Make sure that the green indi...

  • Page 18

    16 installing via network connection 2. Turn on the computer, and then log on as a user with administrative rights. 3. Install the mf driver and mf toolbox. If you have already logged on, exit all the applications which are running. Insert the cd-rom. Click. Click. Read the contents of license agree...

  • Page 19

    17 if no devices are displayed in [device list] perform the following procedure. 1. Check the following. The computer and device are connected via the network. The device is turned on. Ip address is set correctly. The computer and device are on the same subnet. 2. Click [update device list]. If any ...

  • Page 20

    18 installing with usb connection 1. Turn on the computer, and then log on as a user with administrative rights. 2. Install the mf driver and mf toolbox. If you have already logged on, exit all the applications which are running. Connect the usb cable after the installation of software. Make sure th...

  • Page 21

    19 checking the installation results p. 20 3. Connect the usb cable. Remove. Remove it by pulling out the string. (a) (b) connect the cable. Flat end (a): connect to the usb port on the computer. Rectangular end (b): connect to the usb port on the machine. • • when the dialog box is displayed follow...

  • Page 22

    20 checking the installation results make sure that mf driver and mf toolbox are installed correctly. Make sure that the icon of the installed software is added as follows. Software location icon printer driver printer folder windows 2000 from the [start] menu, select [settings] → [printers]. Window...

  • Page 23

    21 how to use the online help in the online help, all the functions of the driver software and information about options are included. If you want to know descriptions of the functions and settings immediately when using the driver software, make use of the online help. How to display the help scree...

  • Page 24

    22 using the e-manual a-1 insert the user software cd-rom in your computer. Click [custom installation]. If cd-rom setup does not appear, see "if the top screen does not appear." select only the [manuals] check box. Click [install]. Installing the e-manual on your computer when the installation fini...

  • Page 25

    23 preface 1 installing the machine 2 configuring and connecting the fax 3 connecting to a computer and installing the drivers 4 appendix checking the ip address a-2 check the network operation. Select with [ ] or [ ], and then press [ok]. Press [ ] (status monitor/cancel). Press [ok]. Select with [...

  • Page 26

    24 1. Check the following points. 2. Delete the software. If you want to uninstall the installed software for the printer/fax/scanner driver for the mf toolbox from the [start] menu, click [(all) programs] → [canon] → [mf8000] → [uninstall drivers]. Click. Click. From the [start] menu, click [(all) ...

  • Page 27

    25 preface 1 installing the machine 2 configuring and connecting the fax 3 connecting to a computer and installing the drivers 4 appendix contacting service center when you have a problem with your machine and you cannot solve it even if you refer to the manuals or online help, please contact our ca...

  • Page 28

    Canon inc. 30-2, shimomaruko 3-chome, ohta-ku, tokyo 146-8501, japan canon marketing japan inc. 16-6, konan 2-chome, minato-ku, tokyo 108-8011, japan canon u.S.A. Inc. One canon plaza, lake success, ny 11042 u.S.A. Canon europa n.V. Bovenkerkerweg 59-61 1185 xb amstelveen, the netherlands canon chin...