Starter guide please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. Open the next page. Read this guide first. Setting up the machine to suit your needs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
1-4 632 mm 100 mm 608 mm 572 mm paper cassette 100 mm 100 mm 100 mm 100 mm.
1-5 1 2 carry the machine to the installation site. Remove the packing materials. Did you remove all the packing materials? Check! X 1 x 3.
1-6 3 prepare the toner cartridge. Next page.
1-7 did you remove all the packing materials? Check!.
1-8 4 load the paper. (1) (2) (3).
1 setting up the machine to suit your needs determine which machine functions (copy, print, scan) you intend to use, and make settings according to the flowchart below. Copy print scan required operations settings are now complete. Start settings. Connecting the power cord p. 3 installing the softwa...
2 about the supplied manual read this manual first. This manual describes the settings for setting up the machine and installing the software. Be sure to read this manual before using the machine. Starter guide this manual • preface • installing the machine • connecting to a computer and installing ...
3 connecting the power cord turn on the machine do not connect the usb cable. Connect the usb cable when installing the software. Off ensure that the machine is off. Plug the power plug into the power socket. Plug the power plug into a ac power outlet. 1. Turn on the machine. On preface 1 installing...
4 setting a paper type press [ ] (menu setting key), and then start the menu operation. Press [ ] (menu setting key) to exit the menu operation. Press [ ] or [ ] until “p” is displayed. Press [ ], and set the menu to be able to change the settings. Press [ ] or [ ] to change the setting values. Pres...
5 installing the driver/software use the supplied user software cd-rom to install the drivers and software. The details of the installation is not described in this manual, see the mf driver installation guide. Insert the cd-rom. Click. Click when referring to the mf driver installation guide. Click...
6 perform useful tasks • enlarged/reduced copies you can enlarge or reduce standard size documents to copy on standard size paper or specify the copy ratio in percentage. • collating you can sort copies into sets arranged in page order. • reduced layout you can reduce multiple documents to copy them...
7 preface 1 installing the machine 2 connecting to a computer and installing the drivers 3 appendix clearing paper jams if the [ ] indicator is blinking, a paper jam occurs inside the printer. Follow the procedures in this section to remove the jammed paper. For details on the procedure for clearing...
8 replacing toner cartridge when the toner nearly runs out, white streaks appear on the output, or the output is partially faded. When this problem occurs follow the steps in the procedure below before replacing the toner cartridge. The machine continues printing until the toner runs out completely....
9 symbols used in this manual warning indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings. Caution indicates a caution concerning operations that may lead to injury to pers...
10 • if excessive stress is applied to the connection part of the power cord, it may damage the power cord or the wires inside the machine may be disconnected. This could result in a fire. Avoid the following situations: - connecting and disconnecting the power cord frequently. - tripping over the p...
11 • there are burn marks on the power plug. - the blade on the power plug is deformed or broken. - the power is turned off or on when bending the power cord. - the coating of the power cord is damaged, cracked, or dented. - a part of the power cord becomes hot. • check regularly that the power cord...
12 power supply requirements 220 to 240 v, 50/60 hz important precautions when connecting the power cord • do not connect this machine to an uninterruptible power source. • use an ac power outlet exclusively for the machine. Do not use the other sockets of the ac power outlet. • do not plug the powe...
13 caution use of controls, adjustments, or performance of procedures other than those specified in the manuals for the machine may result in hazardous radiation exposure. Users in new zealand this equipment does not fully meet telecom’s impedance requirements. Performance limitations may occur when...
Ft5-4103 (030) xxxxxxxxxx copyright canon inc. 2016 printed in korea canon inc. 30-2, shimomaruko 3-chome, ohta-ku, tokyo 146-8501, japan canon marketing japan inc. 16-6, konan 2-chome, minato-ku, tokyo 108-8011, japan canon u.S.A., inc. One canon park, melville, ny 11747, u.S.A. Canon europa n.V. B...
