Canon i-SENSYS MF3010 Starter Manual - page 14
8
Replacing Toner Cartridge
When the toner nearly runs out, white streaks appear on the output, or the output is partially faded.
When this problem occurs
Follow the steps in the procedure below before replacing the toner cartridge. The machine continues printing until the
toner runs out completely.
e-Manual “Before Replacing the Toner Cartridge”
When the print quality is still unacceptable
If the problem persists after you have followed the steps in the procedure below, replace the toner cartridge.
e-Manual “Replacing the Toner Cartridge”
* No message appears on the screen, if the toner nearly runs out. Replace the toner cartridge
when white streaks appear on the output, or the output is partially faded.
See the e-Manual and replace toner cartridge.
Replacing the Toner Cartridge with a New One
For optimum print quality, using Canon genuine toner cartridges is recommended.
Model name
Supported Canon genuine toner cartridge
MF3010
Canon Cartridge 325
The average yield of the included toner cartridge is as follows.
Canon Cartridge 325 Starter
Average yield*1 : 700 sheets
*1 The average yield is on the basis of “ISO/IEC 19752”*
2
under the condition that A4 size paper is used for printing with the default print density setting.
*2 ”ISO/IEC 19752” is an ISO standard method for “the determination toner cartridge yield for monochrome electrophotographic printers and multi-function devices that
contain printer components.” The term ISO stands for International Organization for Standardization.
The average yield of the replacement toner cartridge varies from that of the supplied toner cartridge.
For purchasing replacement toner cartridge, see “About Replacement Toner Cartridges” in the e-Manual.
About the Supplied Toner Cartridge