8-channel cctv surveillance kit user manual c8chcctvkit v2.0
I contents chapter one products introduce ................................... 4 1.1 technical parameter .......................................................... 4 1.2 product overview ................................................................ 4 1.3 key features .................................
Ii 4.3 network setup .................................................................. 19 4.4 system setup ................................................................... 22 4.5 system management ........................................................ 24 chapter five ie preview ..................
3 power this dvr adaptor is dc12v; please make sure the power supply voltage before turn on the machine. If long time do not use the machine, please turn off the power of dvr machine, and let the electric plug away from power socket; 2. Safety this dvr only for indoor use, as for prevent short circu...
4 chapter one products introduce 1.1 technical parameter compression standard h.264 baseline profile@l3.1 video input composite 1.0vp- p/75Ω, bnc×8 video output composite 1.0vp-p/75 Ω,bnc×1, vga×1 resolution preview d1 704×576(pal) ,720×480(ntsc) recording d1 704×576(pal) ,720×480(ntsc) cif 352×288(...
5 chapter two hardware 2.1 h.264 standalone dvr 2.1.1 hard disk installation for the first use, please install the hard disk ○ 1 remove the screws on both ○ 2 extracted from the next cover up ○ 3 connect the data wire ○ 4 connect the power wire ○ 5 fix the screw of the hard disk ○ 6 fix the screw of...
6 rear panel item interface description 1 video in 8ch video input 2 audio in 8ch audio input 3 v-out 1ch video output 4 a-out 1ch audio output 5 vga vga monitor 6 hd-out hdmi interface 7 network rj45 8 usb first usb for backup or upgrade system of dvr; second usb for mouse 9 on/off power supply swi...
7 4 way switching value alarm output, selectable in normally open contact, also selectable in normally closed contact, the external alarm device should be need vcc;.
8 chapter three operation 3.1 operation instruction 3.1.1 remote control and front panel keypad table: s/ n keypad name operating instruction s/ n keypad name operating instruction 1 【power】 power on/off 8 【 enter 】 【ok】 this button is used as“enter”and“ok” key in most circumstances 2 【menu】 access ...
9 to move in the ptz control windows 【rec】 to mode of recording 16 【clear】 clear alarm 7 【search】 search for playback time choosing 3.1.2 how to use mouse of dvr (for right hand mouse) 1 left key single click to any function menu icon click the mouse left key into the menu to run the control point o...
10 button description button description main menu ptz control wizard language alarm control multi channel display setup recording control exit playback back up if before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk connection! Note: in...
11 recording). Directly to pull up the power cable of dvr while the dvr running, directly to pull up the power cable of dvr, please avoid as much as possible to do it. (specially while the dvr recording). Caution: in some area, the power supply is irregularity, it will cause the dvr working not norm...
12 3.7 playback video button description button description synchronous/asynchronous play voice adjustment frame by frame 1/4/8/9screen(switch image) speed slow hide / display list speed normal recording date speed fast play/pause/stop sound off/on rewind note: 1) during playback the playback tool w...
13 3.8 how to control ptz 【zoom】lens in the current play far closer picture, use the mouse wheel also can undertake variable times control. 【focus】slight adjusting the focal length 【iris】aperture size adjustment 【speed】through the slider adjust rotation stepinterval, yuntai mainly used to control di...
14 3.9 alarm control 【set alarm】selection need protection channel, click confirm corresponding channel after in protection status 【clear alarm】remove protection condition, not alarm input to react 【alarm output】open the alarm output.In the premise of no trigger alarm input,user can operate the outpu...
15 【device】the first generation of dvr ’s optional: vga output, tv output etc display output devices, the system may support multiple equipment and output. The second generation of dvr ’s optional:vga output+hdmi output、tv output. 【resolution】setting the resolution of the display device. The first g...
16 chapter four menu operation guide 4.1 recording setup (1) recording setup 【channel】choose the need to install passage "whole" says setting all channels. 【image size】cif/half d1/d1,if the model is 960h,the encoding format maybe is 960h/d1/cif,if the model is 1080p,the encoding format maybe is 1080...
17 【channel】choose the need to install passage "whole" says setting all channels. 【channel name】can manual corresponding input channel's name 【channel display】can choose according to the requirements of users don't use, the top-left corner, left, lower, middle and downward, upper, right, and lower. ...
18 【video mode】provide pal and ntsc both formats video formats choice, modify after you must restart your system can take effect. 【channel】choose to set the video settings area passage "whole" says setting all channels 【reserved section】click settings enter. The white areas for privacy area 【buzzer ...
19 【time】 interval time from 5s to 255s 【full page】 select channel to switch 【quad page】quad mode. 4.3 network setup (1)general setup 【dhcp】after checked automatic assignment device will get ip address, subnet mask, the default gateway, the dns server, etc 【upnp】can choose according to the requireme...
20 2. Manual dialing in the interface of following picture, users would fill the right information in the menu bar as same as automatic dialing and click “save”. Then click “dial-up” after saving successfully (the referred information would be saved still after the dvr restart, but you should click ...
21 【ssl protocol】sending e-mail in use safety network connection 【test email】send an email to the recipient mailbox test 【email address】the recipient's email address. Users can input two different email address. 【send email】the sender email address . 【smtp server】send mailbox mail server 【email acco...
22 【starting ip】display ip address started section 【ending ip】display ip address end segments 【add】on the basis of the need for added 【delete】according to the need to delete 4.4 system setup (1)time 【system language】used in a remote remote device control more hard disk video recorder occasions, only...
23 【user】characters in length up to 8 bytes, ignore trailing spaces. Can be letters, numbers, and other symbols. The user has the largest number of eight, user name may not be repeated. 【user rights】according to the requirements set of functions need checked 【add user】input need to add user, and inp...
24 【buzzer output】in the chosen time intervals have alarm input will start buzzer output. 【send email】in the chosen time intervals have alarm input which will send relevant information, such as the alarm events, paparazzi pictures, equipment name, device id, etc sent to user specifies the mailbox. 【...
25 (2)log search 【date search】can search according to date 【log type】optional: all, operation log, set diaries, alarm log, error log note : according to the left, right arrow can move forward and content. (3)online users display the users who are visiting the dvr. (4)exception handling 【exception ty...
26 restoring default can restore selected according to need. The system restore to the default configuration state out, can according to the menu options choose to restore the corresponding settings. Tip : menu color, language, time date format, video format, ip address, the user account, etc will n...
27 5.2 system settings point , as the picture ,you can set up language directory,after all to save you set..
28 5.3 status control in state control you can set reboot server, close server , remote to go up remote upgrade: let pc file load in the system log: to inquire sometime the server ’s action.
29.
30 chapter six qmeye phone software for use this cloud service platform is the best mobile phone video during the internet era. It consists of front-end acquisition devices, platform servers, and remote view of three parts. 1) the acquisition of client software: the client software can be got from t...
31 will be program icons after finishing installing. 6.1.3 login interface 6.1.3.1 login interface open the software into the login interface, inputting the username and password and click button “login”, then it will be login the application. Icon description: icon function description after select...
32 6.1.3.3 retrieve the password on the register clicking the button “login” and jump to “retrieve password” interface. Input the username, click button “retrieve password”. If you have entered your name and email address when registering and the username has been occupied, then “retrieve password” ...
33 button instruction: icons function instruction return to main menu move to the left move to the right move down move up enlarge narrow zoom out zoom in aperture enlarge aperture narrow start/ close intercom start/ close speakers stop/ start snapshot start / close the local video favorites channel...
34 icon instruction: icon function instruction return to the main menu click on the pop-up menu, such as modifying parameters, name options shot catalogue device after pop-up, add the catalogue,, device and shot menu search the local shot 6.1.5.1 modify the connection parameter click on the icon , s...
35 a) click “ok” button to save the current configuration. B) click “cancel” button to cancel the modifying. 6.1.5.3 delete click on icon , select “delete’ button to delete the current device directly 6.1.5.4 add the catalogue click on icon , select “add the catalogue” option, then pops up “add the ...
36 icon function instruction open the camera and shoot the qr code to obtain the data. Save the device data cancel to add the device. 6.1.5.6 add the shot please see the operation introduction of “add devices”. 6.1.5.7 search the local device click on the icon to enter “search” dialog box. If there ...
37 after select an event type, start time and end time, clicking on the icon will list out the remote video lists, and then click on the item will be selected to play or download videos. 6.1.7 alarm management click the option of “alarm management” in the main menu icon instruction: icon function in...
38 select the option those need to alarm and click the button “setup” to save the current settings; click the button “cancel” to cancel the current settings. 6.1.7.2 unguard click on the icon to select the button “unguard”, cancel the current camera setting. 6.1.7.3 note click on the icon to select ...
39 the icons instruction icon function instruction return to the alarm management search the alarm record page up page down 6.1.8 local playback click on “local playback” option in the main menu, and then into the interface as follows click on the icon , the local playback video list change to editi...
40 click on the icon , the local playback video list change to editing states. Select the image options that you want to delete , and then click on the icon to delete the selected local images. 6.1.10 modify password click on” modify password” option in the main menu, and then into the interface as ...
41 function instruction: function instruction ptz length the camera rotation rate setting do not disturb alarm info tips switch alarm voice close the alarm voice click on the icon to save the current configuration. 6.1.12 help click on “help” option in the main menu, and then into the interface as f...
42 6.1.12 login out click on “login out” option in the main menu, and then into the interface as follows function instruction: function instruction login out log off the current user cancel cancel log off the current user 6.2 instructions of iphone 6.2.1 essential condition 1) support the version io...
43 hisilicon v2.0.0.81 and higher. 6.2.2 installation and operation instructions installation support two installation modes and the user can choose one way for installation. 1. Install online run the app store program of iphone. Switch to the search tag page, and input qmeye in the search box to fi...
44 enter the register information, click “register” then will be registered. Note: please enter the valid e-mail address in order to retrieve your password when you lost it. 6.2.3.3 retrieve the password on the register clicking the button “login” and jump to “retrieve password” interface. Input the...
45 click “favorites” button, go to “collection management” interface select one of the devices on “live list” enters the video preview interface. Button instruction: icons function instruction return to main menu move to the left move to the right move down move up enlarge narrow zoom out.
46 zoom in aperture enlarge aperture narrow start/ close intercom start/ close speakers stop/ start snapshot start / close the local video favorites channel switcher 6.2.5 device management click the button” device management” on the main menu and enter “device management” interface. Icon instructio...
47 a)click on the icon , return to the device management lists. B)click on the icon , save the current configuration. 6.2.5.2 modify the name click on the icon , select the option “modify the name”, then pops up “modify name” or “modify the catalogue” dialog box. A) click “ok” button to save the cur...
48 6.2.5.5 add the device click on the icon to select “add the device” option. Icon instruction icon function instruction open the camera and shoot the qr code to obtain the data. Save the device data return the main menu 6.2.5.6 add the shot please see the operation introduction of “add devices”. 6...
49 icon function instruction return to device management pop up the option of “add menu” search the device again click on the icon , then pop up the menu as follows: a)add a device: add dvr (multi- channel) b)add a shot: add a single camera (single channel) c)modify the name: modify the name of the ...
50 guarded click the pop-up menu options 6.2.7.1 guard click on the icon to select “guard” option, pop up the dialog box as follows: select the option those need to alarm and click the button “ok” to save the current settings; click the button “cancel” to cancel the current settings. 6.2.7.2 unguard...
51 delete the current number 6.2.7.4 record click on the icon to select “record” option , and then pop up the dialog of “alarm record” the icons instruction icon function instruction return to the alarm management search the alarm record page up page down 6.2.8 local playback click on “local playbac...
52 6.2.9 image view click on “images browsing” option click on the icon , the local playback video list change to editing states. Select the image options that you want to delete, and then click on the button delete to delete the selected local images. 6.2.10 modify password click on” modify passwor...
53 function instruction: function instruction ptz length the camera rotation rate setting do not disturb alarm info tips switch alarm voice close the alarm voice alarm languagece alarm push language click on the icon to save the current configuration. Chapter seven faq (frequently asked questions) 0...
54 ②the hard disk drive error will cause the system research the data repeatedly, caused the boot running slow. 04:why does the system reboot repeatedly? ①check the hard disk drive, if there is not the fat32 formatted in it or the problem in it and caused the dvr reboot; ②please check the power supp...