D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge DWL-G810 Quick Installation Manual - Mode
4
Connecting the DWL-G810 in Ad-Hoc
Mode
Setup #2
Web-based Configuration
Before You Begin the Configuration
•
It is best to use a computer (with an Ethernet adapter) that is connected to a switch for
configuring the DWL-G810.
(
Note
: You also have the option of connecting the DWL-
G810 directly to the computer that will be used for configuration).
The default IP
address for the DWL-G810 is
192.168.0.30
with a Subnet Mask of
255.255.255.0
. You
will need to assign your computer a static IP address within the same range as the
DWL-G810’s IP address for the purpose of configuring the DWL-G810.
See the Manual
on the CD-ROM if you need assistance in assigning a static IP address for your network
adapter.
Open your Web browser
and
type
“http://192.168.0.30”
into
the URL address box. Then
press the
Enter
or
Return
key.
or
or