1. DL manuals
  2. D-Link
  3. Wireless Access Point
  4. AirPremier N DAP-3690
  5. Quick Install Manual

D-Link AirPremier N DAP-3690 Quick Install Manual - Physical Installation

Manual is about: AirPremier N Concurrent Dual band Outdoor PoE Access Point

Summary of AirPremier N DAP-3690

  • Page 2: Dap-3690 Quick Install Guide

    D-link dap-3690 quick install guide 2 dap-3690 quick install guide this installation guide provides basic instructions for installing the dap-3690 wireless access point on your network. For additional information about how to use the access point, please refer to the user manual which is available o...

  • Page 3: Before You Begin

    D-link dap-3690 quick install guide 3 before you begin this chapter describes safety precautions and product information you have to know and check before installing dap-3690. Professional installation required 1. Please seek assistance from a professional installer who is well trained in rf install...

  • Page 4: Physical Installation

    D-link dap-3690 quick install guide 4 physical installation step 1: 1 ethernet cable is not provided in this package 2 the unit must be properly grounded to protect against power surges. The grounding point can be found on the bottom of the unit. Connect the ethernet cable 1 with the waterproof encl...

  • Page 5

    D-link dap-3690 quick install guide 5 physical installation (continued) physical installation: console cable 1 1 do not expose the console cable in an outdoor environment for long term use. 2 cat5e ethernet cable and cat5e rj45 modular inline coupler are not included. Please use a straight-through c...

  • Page 6: Connecting The Dap-3690

    D-link dap-3690 quick install guide 6 connecting the dap-3690 outdoor poe access point to your network hardware installation overview complete the physical installation first. Connect the ethernet (connected to the dap-3690 in step 1 on page 4) to the p+ data out port on the poe base unit. Connect a...

  • Page 7: Your Setup Is Complete!

    D-link dap-3690 quick install guide 7 your setup is complete! * maximum wireless signal rate derived from ieee 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network...

  • Page 8: Configuration

    D-link dap-3690 quick install guide 8 connect the dap-3690 to a local computer if you are configuring the dap-3690 locally (without connecting its power injector to a wired lan), connect a pc to the power injector’s ethernet port using a cat5 ethernet cable. 1. Assign a static ip address to your pc ...