D-Link AirPremier N DAP-3690 Reference manual - page 16
get daylightsaving
Display daylight saving time
get sntpserver
Display SNTP/NTP server IP address
get tzonelist
Display time zone
set daylightsaving
Set daylight saving time
set sntpserver x.x.x.x
Set SNTP/NTP server IP address
set tzone
Set time zone setting
TFTP Commands
TFTP Commands
Description
tftp getconfig
Use TFTP to get a configuration file from a PC
tftp getfirmware
Use TFTP to get firmware from a PC
tftp putconfig
Use TFTP to put configuration on a PC
DHCP Server Commands
DHCP Server Commands
Description
get dhcp_dns
Display DHCP server DNS IP
get dhcp_endip
Display DHCP server end IP
get dhcp_gateway
Display DHCP server gateway IP
get dhcp_leasetime
Display DHCP server lease time
get dhcp_netmask
Display DHCP server net mask
get dhcp_server
Display DHCP server states
get dhcp_startip
Display DHCP server start IP
get dhcp_sta_expire
Display DHCP server STA's expire time
get dhcp_sta_hostname
Display DHCP server STA's host name
get dhcp_sta_mac
Display DHCP server STA's MAC
get dhcp_sta_ip
Display DHCP server STA's IP
get dhcp_staticip_mode
Display DHCP server static mode states
get dhcp_staticip_ip
Display DHCP server static mode IP
get dhcp_staticip_mac
Display DHCP server static mode MAC
get dhcp_staticip_hostname
Display DHCP server static mode host name
get dhcp_staticip_pool_state
Display DHCP server static mode pool state
get dhcp_wins
Display DHCP server WINS IP
set dhcp_dns
Set DHCP server DNS IP
set dhcp_endip
Set DHCP server end IP
set dhcp_gateway
Set DHCP server gateway IP
set dhcp_leasetime
Set DHCP server lease time
set dhcp_netmask
Set DHCP server net mask
set dhcp_server
Set DHCP server state
set dhcp_server_static_ip_mode
Set dhcp server static ip mode states
set dhcp_startip
Set DHCP server start IP
set dhcp_staticip_set_disable
Set dhcp staticip disable
set dhcp_staticip_set_enable
Set dhcp staticip enable