D-Link AirPro DWL-5000AP Manual - Troubleshooting (Continued)
26
Troubleshooting (continued)
2. The computer with the wireless adapter installed is unable to
connect to the wireless network.
In the example below, we show you the settings of the DWL-A650 wireless
cardbus adapter. You may be using other adapters, but the procedure will
remain the same. The first screen and the path to reach it, can be found in
the Networking Basics section in this manual entitled: Checking the
Wireless Configuration of the Network Adapter. The second screen and
the path to reach it, can be found in the Using the Configuration Utility
section of this manual.
• In Infrastructure mode, make sure the same Service Set Identifier
(SSID) is specified in the settings for the wireless clients and access
points. The SSID factory default setting for the D-Link AirPro products
is Default (Upper-case D, with the remainder of the word in lower-
case.)Please refer to Checking the Wireless Configuration in the
Networking Basics section of this manual for more information.
• Check that the Network Connection for the wireless client is
configured properly. Select AP (Infrastructure) when connecting to
an access point. Double-click on the Local Area Connection icon in
the taskbar > click on Properties > click on Configure > select the
Settings Tab > click on Modify to change the settings for the wireless
adapter. (Please refer to Checking the Wireless Configuration in
the Networking Basics section of this manual for more information.)
DWL-5000AP Settings
802.11a Network Adapter
Settings