D-Link AirPro DWL-5000AP Manual - Leds
Product Features
•
Adheres to 802.11a standard in providing high data wireless transfer rates of up to
54 Mbps.* Capable of providing data rates of up to 72 Mbps in Turbo Mode.
•
Web-based interface for Managing and Configuring
•
Eight non-overlapping Channels available to users
•
Operation in the 5.2GHz Unlicensed National Information Infrastructure (U-NII)
frequency band
•
Orthogonal Frequency Division Multiplexing (OFDM) – a new technique for
transmitting high-speed data over a radio wave.
•
Dynamic data rate scaling from 6, 9, 12, 18, 24, 36, 48, 54 and 72Mbps depending
upon reception quality.
•
Maximum reliability, throughput and connectivity with automatic data rate switching.
•
Supports Wired Equivalent Privacy (WEP) data encryption at 64/128/152-bit
encryption with dynamic key exchange for security.
•
Two external antennas
*Maximum wireless signal rate based on IEEE Standard 802.11a specifications. Actual data
throughput will vary. Network conditions and environmental factors, including volume of
network traffic, building materials and construction, and network overhead lower actual data
throughput rate.
LEDS
LED stands for Light-Emitting Diode. The DWL-5000AP Wireless Access
Point has 4 LEDs as shown below:
LED LED
Activity
Power
Steady light indicates a connection
to a power source
10M
Flashes steadily to indicate
connection; intermittent flashes
indicate activity at 10Mbps
100M
Flashes steadily to indicate
connection; intermittent flashes
indicate activity at 100Mbps
11a
Flashes steadily to indicate a
wireless connection