- DL manuals
- D-Link
- Wireless Access Point
- DAP-1360
- User Manual
D-Link DAP-1360 User Manual - Security Settings
DAP-1360 Wireless N 300 Access Point & Router
User Manual
Configuring Device (Access Point Mode)
Security Settings
On the Wi-Fi / Security settings page, you can modify security settings of the WLAN.
Figure 40. The default security settings.
By default, the Open network authentication type with no encryption is specified for the WLAN.
!
The default security settings do not provide sufficient protection for the WLAN. Please,
specify your own security settings for the WLAN (or each part of the WLAN if the
network was splitted into parts).
Page 52 of 212
Summary of DAP-1360
Page 1
User manual dap-1360 wireless n 300 access point & router july 2012.
Page 2: Contents
Dap-1360 wireless n 300 access point & router user manual contents chapter 1. Introduction..........................................6 contents and audience.......................................................6 conventions.................................................................6 document s...
Page 3
Dap-1360 wireless n 300 access point & router user manual wi-fi......................................................................49 common settings..........................................................49 basic settings...........................................................50 security set...
Page 4
Dap-1360 wireless n 300 access point & router user manual net.......................................................................128 wan.....................................................................128 creating pppoe wan connection.........................................129 creating stati...
Page 5
Dap-1360 wireless n 300 access point & router user manual chapter 6. Operation guidelines................................210 safety instructions.......................................................210 wireless installation considerations......................................210 chapter 7. Abbrevia...
Page 6: Chapter 1. Introduction
Dap-1360 wireless n 300 access point & router user manual introduction chapter 1. Introduction contents and audience this manual describes the access point dap-1360 and explains how to configure and operate it. This manual is intended for users familiar with basic networking concepts, who create an ...
Page 7: Chapter 2. Overview
Dap-1360 wireless n 300 access point & router user manual overview chapter 2. Overview general information the dap-1360 device is a wireless access point supporting the router mode. It is an affordable solution for creating wireless networks at home or in an office. Using dap-1360, you are able to q...
Page 8: Specifications
Dap-1360 wireless n 300 access point & router user manual overview specifications * wan interface: • 1 10/100base-tx ethernet port for cable or dsl modem or private ethernet line . Lan interface: • 1 10/100base-tx ethernet port. Wlan interface: • ieee 802.11n (up to 300mbps) • ieee 802.11b/g. Operat...
Page 9
Dap-1360 wireless n 300 access point & router user manual overview wireless connection: • wlan splitting (up to 4 ssids) • supported security settings: ◦ wep ◦ wpa/wpa2 personal • mac filter • managing connected stations • pin and pbc methods of wps • wmm (wi-fi qos) • advanced settings • wds • “cli...
Page 10
Dap-1360 wireless n 300 access point & router user manual overview configuration and management: • multilingual web-based interface for configuration and management • access via telnet • firmware update via web-based interface • saving/restoring configuration to/from file • support of remote logging...
Page 11: Product Appearance
Dap-1360 wireless n 300 access point & router user manual overview product appearance front panel figure 1. Front panel view. Led mode description power solid green the device is powered on. No light the device is powered off. Wlan solid green the device's wlan is on. Blinking green the wlan interfa...
Page 12: Back Panel
Dap-1360 wireless n 300 access point & router user manual overview back panel figure 2. Back panel view. Port description 12 vdc in power connector. Internet a port to connect to a cable or dsl modem or to a private ethernet line (it is recommended to use the cable included in the delivery package)....
Page 13: Delivery Package
Dap-1360 wireless n 300 access point & router user manual overview delivery package the following should be included: • access point dap-1360 • power adapter dc 12v • ethernet cable (cat 5e) • “quick installation guide” (brochure). The “user manual” and “quick installation guide” documents in russia...
Page 14: Before You Begin
Dap-1360 wireless n 300 access point & router user manual installation and connection chapter 3. Installation and connection before you begin please, read this manual prior to installing the device. Make sure that you have all the necessary information and equipment. Operating system configuration o...
Page 15: Connecting To Pc
Dap-1360 wireless n 300 access point & router user manual installation and connection connecting to pc pc with ethernet adapter 1. Make sure that your pc is powered off. 2. Connect an ethernet cable between the lan port located on the back panel of the access point and the ethernet port of your pc. ...
Page 16
Dap-1360 wireless n 300 access point & router user manual installation and connection 3. In the local area connection properties window, on the general tab, select the internet protocol (tcp/ip) line. Click the properties button. Figure 4. The local area connection properties window. Page 16 of 212.
Page 17
Dap-1360 wireless n 300 access point & router user manual installation and connection 4. Select the obtain an ip address automatically and obtain dns server address automatically radio buttons. Click the ok button. Figure 5. The internet protocol (tcp/ip) properties window. 5. Click the ОК button in...
Page 18
Dap-1360 wireless n 300 access point & router user manual installation and connection obtaining ip address automatically in os windows 7 1. Click the start button and proceed to the control panel window. 2. Select the network and sharing center section. (if the control panel has the category view (t...
Page 19
Dap-1360 wireless n 300 access point & router user manual installation and connection 3. In the menu located on the left part of the window, select the change adapter settings line. Figure 7. The network and sharing center window. Page 19 of 212.
Page 20
Dap-1360 wireless n 300 access point & router user manual installation and connection 4. In the opened window, right-click the relevant local area connection icon and select the properties line in the menu displayed. Figure 8. The network connections window. Page 20 of 212.
Page 21
Dap-1360 wireless n 300 access point & router user manual installation and connection 5. In the local area connection properties window, on the networking tab, select the internet protocol version 4 (tcp/ipv4) line. Click the properties button. Figure 9. The local area connection properties window. ...
Page 22: Pc With Wi-Fi Adapter
Dap-1360 wireless n 300 access point & router user manual installation and connection 6. Select the obtain an ip address automatically and obtain dns server address automatically radio buttons. Click the ok button. Figure 10. The internet protocol version 4 (tcp/ipv4) properties window. 7. Click the...
Page 23
Dap-1360 wireless n 300 access point & router user manual installation and connection configuring wi-fi adapter in os windows xp 1. Click the start button and proceed to the control panel > network and internet connections > network connections window. 2. Select the icon of the wireless network conn...
Page 24
Dap-1360 wireless n 300 access point & router user manual installation and connection configuring wi-fi adapter in os windows 7 1. Click the start button and proceed to the control panel window. 2. Select the network and sharing center section. (if the control panel has the category view (the catego...
Page 25
Dap-1360 wireless n 300 access point & router user manual installation and connection 6. In the opened window, in the list of available wireless networks, select the wireless network dap-1360 and click the connect button. Figure 14. The list of available networks. 7. Wait for about 20-30 seconds. Af...
Page 26
Dap-1360 wireless n 300 access point & router user manual installation and connection connecting to web-based interface when you have configured your computer, you can access the web-based interface and configure needed parameters (configure the wireless network, change the operating mode of the dev...
Page 27
Dap-1360 wireless n 300 access point & router user manual installation and connection right after the first access to the web-based interface you are forwarded to the page for changing the administrator password specified by default. Figure 17. The page for changing the default administrator passwor...
Page 28
Dap-1360 wireless n 300 access point & router user manual installation and connection web-based interface structure after successful registration the access point's quick settings page opens. The selected operating mode defines the view of the quick settings page and the components of the web-based ...
Page 29
Dap-1360 wireless n 300 access point & router user manual installation and connection also you can find a specific page via search. To do this, enter the name of the page, wholly or partly, in the search bar in the top part of the web-based interface page, and then select a needed link in the search...
Page 30: Access Point Mode
Dap-1360 wireless n 300 access point & router user manual installation and connection access point mode the quick settings page displays general information on the access point and its software (the version and the date of the firmware, the ip address of the device, the name of the wlan, etc.). Figu...
Page 31
Dap-1360 wireless n 300 access point & router user manual installation and connection to configure the access point's wlan parameters, left-click the ssid of the wlan (the right column of the ssid line). After clicking the line, the wi-fi / basic settings page opens (for the detailed description of ...
Page 32: Router Mode
Dap-1360 wireless n 300 access point & router user manual installation and connection the pages of the system section provide functions for managing the internal system of the access point (for the description of the pages, see the system section, page 74). Also you can change the operating mode of ...
Page 33
Dap-1360 wireless n 300 access point & router user manual installation and connection to edit the access point's local interface parameters, left-click the ip or mac address of the local interface (the right column of the lan ip line or lan mac line correspondingly). After clicking the line, the pag...
Page 34
Dap-1360 wireless n 300 access point & router user manual installation and connection the pages of the wi-fi section are designed for specifying all needed settings of the access point's wireless network (for the description of the pages, see the wi-fi section, page 152). Also you can enable or disa...
Page 35
Dap-1360 wireless n 300 access point & router user manual installation and connection figure 25. The top-page menu. Click the reboot line if you have already saved the access point's settings. Click the save&reboot line to save new settings and immediately reboot the access point. Click the save lin...
Page 36: Device Operation Modes
Dap-1360 wireless n 300 access point & router user manual installation and connection device operation modes access point mode in the access point mode, the device is used to create a wireless local area network or to connect to a wired router. Router mode in the router mode, the device is used to c...
Page 37: Mode)
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) chapter 4. Configuring device (access point mode) wireless network settings wizard to specify all needed settings for your wireless network, click the wireless network settings wizard link in the wi-fi s...
Page 38
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) in the basic settings section, you can change the basic parameters of your access point's wlan: “hide” your wireless network (hide access point), specify a name for the network (ssid), select your locati...
Page 39
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) on the next page, you can modify security settings of the wlan. By default, the open network authentication type with no encryption is specified for the wlan. Figure 28. The default security settings. ! ...
Page 40
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) figure 29. Network authentication types supported by the access point. The access point supports the following authentication types: authentication type description open open authentication (with wep enc...
Page 41
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) when the open or shared value is selected, the wep encryption settings section is displayed (the section is unavailable for the wireless network operating modes which support the standard 802.11n): figur...
Page 42
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) when the wpa-psk or wpa2-psk value is selected, the wpa encryption settings section is displayed: figure 31. The wpa2-psk value is selected from the network authentication drop-down list. Parameter descr...
Page 43: Status
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) status the pages of this section display data on the current state of the access point: • network statistics • ip addresses leased by the dhcp server • data on devices connected to the access point's net...
Page 44: Dhcp
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) dhcp the status / dhcp page displays the information on computers that have been identified by hostnames and mac addresses and have got ip addresses from the dhcp server of the device, as well as the ip ...
Page 45: Lan Clients
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) lan clients on the status / lan clients page, you can view the list of devices connected to the access point and devices accessing its web-based interface. Figure 34. The status / lan clients page. For e...
Page 46: Net
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) net in this menu you can configure basic parameters of the local area network of the access point. Lan to configure the access point's local interface, proceed to the net / lan page. Figure 35. Basic set...
Page 47
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) parameter description mode an operating mode of the access point's dhcp server. Enable: the access point assigns ip addresses to clients automatically in accordance with the specified parameters. When th...
Page 48
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) figure 37. The section for creating mac-ip pairs. To create a mac-ip pair, click the add button. In the ip field, enter an ip address which will be assigned to the device from the lan, then in the mac fi...
Page 49: Wi-Fi
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) wi-fi in this menu you can specify all needed settings for your wireless network. Common settings on the wi-fi / common settings page, you can enable your wireless local area network (wlan) and split it ...
Page 50: Basic Settings
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) basic settings on the wi-fi / basic settings page, you can configure basic parameters of the device's wlan. Figure 39. Basic settings of the wireless lan. Page 50 of 212.
Page 51
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) parameter description hide access point if the checkbox is selected, other users cannot see your wi-fi network. (it is recommended not to select this checkbox in order to simplify initial configuration o...
Page 52: Security Settings
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) security settings on the wi-fi / security settings page, you can modify security settings of the wlan. Figure 40. The default security settings. By default, the open network authentication type with no e...
Page 53
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) figure 41. Network authentication types supported by the access point. The access point supports the following authentication types: authentication type description open open authentication (with wep enc...
Page 54
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) when the open or shared value is selected, the wep encryption settings section is displayed (the section is unavailable for the wireless network operating modes which support the standard 802.11n): figur...
Page 55
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) when the wpa-psk or wpa2-psk value is selected, the wpa encryption settings section is displayed: figure 43. The wpa2-psk value is selected from the network authentication drop-down list. Parameter descr...
Page 56: Mac Filter
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) mac filter on the wi-fi / mac filter page, you can define a set of mac addresses of devices which will be allowed to access the wlan, or define mac addresses of devices which will not be allowed to acces...
Page 57
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) figure 45. The tab for adding a mac address. Enter an address in the mac address field of the mac address adding section and click the add button. To remove a mac address from the list of mac addresses, ...
Page 58: Station List
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) station list on the wi-fi / station list page, you can view the list of wireless clients connected to the access point. Devices connected to the access point via the wds function are not displayed in the...
Page 59: Wps
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) wps on the wi-fi / wps page, you can enable the function for secure configuration of the wlan and select a method used to easily add wireless devices to the wlan. The wps function helps to configure the ...
Page 60
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) to activate the wps function, select the wps enable checkbox and click the change button. When the checkbox is selected, the information and connection sections are available on the page. Parameter descr...
Page 61
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) using wps function via web-based interface to add a wireless device via the pin method of the wps function, follow the next steps: 1. Select the wps enable checkbox. 2. Click the change button. 3. Select...
Page 62
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) later you will be able to add wireless devices to the wlan by pressing the wps/reset button of the access point. 1. Select the pbc method in the software of the wireless device that you want to connect t...
Page 63: Wds
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) wds on the wi-fi / wds page, you can enable the wds function and select a mode of this function. The wds function allows joining local area networks together via a wireless connection of access points. F...
Page 64
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) the following fields are available on the page: parameter description wds mode the wds function mode. Disable: the function is disabled. Bridge mode: access points communicate to each other only, wireles...
Page 65: Additional Settings
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) additional settings on the wi-fi / additional settings page, you can define additional parameters for the wlan of the access point. ! Changing parameters presented on this page may negatively affect your...
Page 66
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) parameter description tx power the transmit power (in percentage terms) of the access point. Bg protection the 802.11b and 802.11g protection function is used to minimize collisions between devices of yo...
Page 67: Wmm
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) wmm on the wi-fi / wmm page, you can enable the wi-fi multimedia function. The wmm function implements the qos features for wi-fi networks. It helps to improve the quality of data transfer over wi-fi net...
Page 68
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) for every access category the following fields are available: parameter description aifsn arbitrary inter-frame space number. This parameter influences time delays for the relevant access category. The l...
Page 69: Client
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) client on the wi-fi / client page in the access point mode, you can configure the device as a client to connect to a wireless access point. The “client” function in the access point mode allows using dap...
Page 70
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) figure 52. The page for configuring the client mode. To configure the access point as a client, select the enable client checkbox. When the checkbox is selected, the following fields are displayed on the...
Page 71
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) when the open or shared authentication type is selected, the following fields are available: parameter description enable encryption wep the checkbox activating wep encryption. When the checkbox is selec...
Page 72: Firewall
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) firewall in this menu you can configure the firewall of the access point. Mac filter on the firewall / mac filter page, you can configure mac-address-based filtering for computers of the access point's l...
Page 73
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) figure 54. The page for adding an address for the mac filter. On the opened page, enter the mac address of the device from the access point's lan in the mac address field. To choose a device connected to...
Page 74: System
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) system in this menu you can do the following: • change the password used to access the access point's settings • save the current settings to the non-volatile memory • create a backup of the access point...
Page 75: Administrator Password
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) administrator password on the system / administrator password page, you can change the password for the administrator account used to access the web-based interface of the access point and to access the ...
Page 76: Configuration
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) configuration on the system / configuration page, you can save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the device's con...
Page 77
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) the following buttons are available on the page: control description save click the button to save settings to the non-volatile memory. Please, save settings every time you change the device's parameters...
Page 78: System Log
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) system log on the system / system log page, you can set the system log options and configure sending the system log to a remote host. Figure 57. The system / system log page. The configuration tab. To en...
Page 79
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) control description port a port of the host specified in the server field. By default, the value 514 is specified. After specifying the needed parameters, click the change button. To disable logging of t...
Page 80: Firmware Upgrade
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) firmware upgrade on the system / firmware upgrade page, you can upgrade the firmware of the access point. ! Upgrade the firmware only when the access point is connected to your pc via a wired connection....
Page 81
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) 6. Select the factory line in the top-page menu displayed when the mouse pointer is over the system caption. 7. Wait until the access point is rebooted. Log into the web-based interface, using the defaul...
Page 82: Ping
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) ping on the system / ping page, you can check availability of a host from the local or global network via the ping utility. The ping utility sends echo requests to a specified host and receives echo repl...
Page 83: Telnet
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) telnet on the system / telnet page, you can enable or disable access to the device settings via telnet from your lan. By default, access is enabled. Figure 61. The system / telnet page. To disable access...
Page 84: Device Mode
Dap-1360 wireless n 300 access point & router user manual configuring device (access point mode) device mode on the system / device mode page, you can change the operating mode of the device. Figure 62. The page for changing the operating mode of the device. To switch the device to the other mode, s...
Page 85: Click'N'Connect
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) chapter 5. Configuring device (router mode) click'n'connect to configure connection to the internet, click the click'n'connect link in the net section. Figure 63. Configuring connection to the internet. Connec...
Page 86
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 64. The page for selecting the connection type. On the opened page, select the needed choice of the radio button and click the next button. Page 86 of 212.
Page 87: Creating Wan Connection
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) creating wan connection pppoe connection figure 65. Configuring pppoe wan connection. In the connection name field, specify a name for the connection for easier identification. In the username field, enter you...
Page 88
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 66. Configuring pppoe wan connection. The expert settings mode. The ethernet section. Parameter description connection name a name for connection for easier identification. Ethernet mtu the maximum size...
Page 89
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 67. Configuring pppoe wan connection. The expert settings mode. The ppp section. Parameter description ppp username a username (login) to access the internet. Without authorization select the checkbox i...
Page 90
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description dial on demand select the checkbox if you want the access point to establish connection to the internet on demand. In the maximum idle time field, specify a period of inactivity (in secon...
Page 91
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 68. Configuring pppoe wan connection. The expert settings mode. The miscellaneous section. Parameter description miscellaneous enable rip select the checkbox to allow using rip for this connection. Enab...
Page 92
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) static ip connection figure 69. Configuring static ip wan connection. In the connection name field, specify a name for the connection for easier identification. Fill in the ip address and netmask fields. In th...
Page 93
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 70. Configuring static ip wan connection. The expert settings mode. The ethernet section. Parameter description connection name a name for connection for easier identification. Ethernet mtu the maximum ...
Page 94
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 71. Configuring static ip wan connection. The expert settings mode. The ip and miscellaneous sections. Parameter description ip ip address enter an ip address for this wan connection. Netmask enter a su...
Page 95
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description ping select the checkbox to allow the access point to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this ch...
Page 96
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) dynamic ip connection figure 72. Configuring dynamic ip wan connection. In the connection name field, specify a name for the connection for easier identification. If your isp has provided the addresses of the ...
Page 97
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 73. Configuring dynamic ip wan connection. The expert settings mode. The ethernet section. Parameter description connection name a name for connection for easier identification. Ethernet mtu the maximum...
Page 98
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 74. Configuring dynamic ip wan connection. The expert settings mode. The ip and miscellaneous sections. Parameter description ip obtain dns server addresses automatically select the checkbox to configur...
Page 99
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description ping select the checkbox to allow the access point to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this ch...
Page 100
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) pptp + static ip or l2tp + static ip connection figure 75. Configuring pptp + static ip wan connection. Fill in the ip address and netmask fields. In the gateway ip address field, enter the ip address of the g...
Page 101
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 76. Configuring pptp + static ip wan connection. The expert settings mode. The ethernet section. Parameter description ethernet mtu the maximum size of units transmitted by the interface. Mac a mac addr...
Page 102
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 77. Configuring pptp + static ip wan connection. The expert settings mode. The ip and miscellaneous sections. Parameter description ip ip address enter an ip address for this wan connection. Netmask ent...
Page 103
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description ping select the checkbox to allow the access point to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this ch...
Page 104
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 79. Configuring pptp + static ip wan connection. In the connection name field, specify a name for the connection for easier identification. In the username field, enter your login, and in the password a...
Page 105
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 80. Configuring pptp + static ip wan connection. The expert settings mode. The vpn section. Parameter description connection name a name for connection for easier identification. Vpn connect automatical...
Page 106
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description encryption select a method of mppe encryption. • no encrypt: mppe encryption is not applied. • mppe 40/128 bit: mppe encryption with a 40-bit or 128-bit key is applied. • mppe 40 bit: mpp...
Page 107
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 81. Configuring pptp + static ip wan connection. The expert settings mode. The miscellaneous section. Parameter description miscellaneous enable rip select the checkbox to allow using rip for this conne...
Page 108
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) pptp + dynamic ip or l2tp + dynamic ip connection figure 82. Configuring pptp + dynamic ip wan connection. If your isp has provided the addresses of the dns servers, deselect the obtain dns server addresses au...
Page 109
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 83. Configuring pptp + dynamic ip wan connection. The expert settings mode. The ethernet section. Parameter description ethernet mtu the maximum size of units transmitted by the interface. Mac a mac add...
Page 110
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 84. Configuring pptp + dynamic ip wan connection. The expert settings mode. The ip and miscellaneous sections. Parameter description ip obtain dns server addresses automatically select the checkbox to c...
Page 111
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description ping select the checkbox to allow the access point to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this ch...
Page 112
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 86. Configuring pptp + dynamic ip wan connection. The expert settings mode. The vpn section. Parameter description connection name a name for connection for easier identification. Vpn connect automatica...
Page 113
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description encryption select a method of mppe encryption. • no encrypt: mppe encryption is not applied. • mppe 40/128 bit: mppe encryption with a 40-bit or 128-bit key is applied. • mppe 40 bit: mpp...
Page 114
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 87. Configuring pptp + dynamic ip wan connection. The expert settings mode. The miscellaneous section. Parameter description miscellaneous enable rip select the checkbox to allow using rip for this conn...
Page 115
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) checking internet availability on the page, you can check the wan connection you have created. Figure 88. Checking the internet availability. In the result section, the status of the wan connection and possibl...
Page 116
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) configuring wireless connection on the page, you can change the name of your wireless network, specify a password to it, or disable wi-fi connections. Figure 89. Configuring the wireless connection. In the ssi...
Page 117
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) wireless network settings wizard to specify all needed settings for your wireless network, click the wireless network settings wizard link in the wi-fi section. Figure 90. Common and advanced settings of the w...
Page 118
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) in the basic settings section, you can change the basic parameters of your access point's wlan: “hide” your wireless network (hide access point), specify a name for the network (ssid), select your location (co...
Page 119
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) on the next page, you can modify security settings of the wlan. By default, the open network authentication type with no encryption is specified for the wlan. Figure 92. The default security settings. ! The de...
Page 120
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 93. Network authentication types supported by the access point. The access point supports the following authentication types: authentication type description open open authentication (with wep encryptio...
Page 121
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) when the open or shared value is selected, the wep encryption settings section is displayed (the section is unavailable for the wireless network operating modes which support the standard 802.11n): figure 94. ...
Page 122
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) when the wpa-psk or wpa2-psk value is selected, the wpa encryption settings section is displayed: figure 95. The wpa2-psk value is selected from the network authentication drop-down list. Parameter description...
Page 123
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) virtual server settings wizard to create a virtual server for redirecting incoming internet traffic to a specified ip address in the lan, click the virtual server settings wizard link in the firewall section. ...
Page 124: Status
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) status the pages of this section display data on the current state of the access point switched to the router mode: • network statistics • ip addresses leased by the dhcp server • the routing table • data on d...
Page 125: Dhcp
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) dhcp the status / dhcp page displays the information on computers that have been identified by hostnames and mac addresses and have got ip addresses from the dhcp server of the device, as well as the ip addres...
Page 126: Routing Table
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) routing table the status / routing table page displays the information on routes. The table contains destination ip addresses, gateways, subnet masks, and other data. Figure 99. The status / routing table page...
Page 127: Lan Clients
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) lan clients on the status / lan clients page, you can view the list of devices connected to the access point and devices accessing its web-based interface. Figure 100. The status / lan clients page. For each d...
Page 128: Net
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) net in this menu you can configure basic parameters of the local area network of the access point and configure connection to the internet (a wan connection). Wan on the net / wan page, you can create and edit...
Page 129
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) creating pppoe wan connection to create a connection of the pppoe type, click the add button on the net / wan page. On the opened page, select the pppoe value from the connection type drop-down list and specif...
Page 130
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description mac a mac address assigned to the interface. This parameter is mandatory if your isp uses mac address binding. In the field, enter the mac address registered by your isp upon concluding t...
Page 131
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description ppp username a username (login) to access the internet. Without authorization select the checkbox if you don't need to enter a username and password to access the internet. Password a pas...
Page 132
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 104. The page for creating a new connection. The miscellaneous section. Parameter description miscellaneous enable rip select the checkbox to allow using rip for this connection. Enable igmp multicast s...
Page 133
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) creating static ip wan connection to create a connection of the static ip type, click the add button on the net / wan page. On the opened page, select the static ip value from the connection type drop-down lis...
Page 134
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description mac a mac address assigned to the interface. This parameter is mandatory if your isp uses mac address binding. In the field, enter the mac address registered by your isp upon concluding t...
Page 135
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description ip ip address enter an ip address for this wan connection. Netmask enter a subnet mask for this wan connection. Gateway ip address enter an ip address of the gateway used by this wan conn...
Page 136
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) creating dynamic ip wan connection to create a connection of the dynamic ip type, click the add button on the net / wan page. On the opened page, select the dynamic ip value from the connection type drop-down ...
Page 137
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description mac a mac address assigned to the interface. This parameter is mandatory if your isp uses mac address binding. In the field, enter the mac address registered by your isp upon concluding t...
Page 138
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description ip obtain dns server addresses automatically select the checkbox to configure automatic assignment of dns server addresses. If the checkbox is selected, the primary dns server and seconda...
Page 139
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) creating pptp + static ip or l2tp + static ip wan connection to create a connection of the pptp + static ip or l2tp + static ip type, click the add button on the net / wan page. On the opened page, select the ...
Page 140
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description mac a mac address assigned to the interface. This parameter is mandatory if your isp uses mac address binding. In the field, enter the mac address registered by your isp upon concluding t...
Page 141
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description miscellaneous enable rip select the checkbox to allow using rip for this connection. Enable igmp multicast select the checkbox to allow multicast traffic from the external network (e.G. V...
Page 142
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description vpn connect automatically select the checkbox to enable auto-start of the connection upon the boot-up of the access point . Username a username (login) to access the internet. Without aut...
Page 143
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description static ip address fill in the field if you want to use a static ip address to access the internet. Ppp debug select the checkbox if you want to log all data on ppp connection debugging. I...
Page 144
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) creating pptp + dynamic ip or l2tp + dynamic ip wan connection to create a connection of the pptp + dynamic ip or l2tp + dynamic ip type, click the add button on the net / wan page. On the opened page, select ...
Page 145
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description mac a mac address assigned to the interface. This parameter is mandatory if your isp uses mac address binding. In the field, enter the mac address registered by your isp upon concluding t...
Page 146
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description enable igmp multicast select the checkbox to allow multicast traffic from the external network (e.G. Video streaming) to be received. Nat select the checkbox if you want one wan ip addres...
Page 147
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description vpn connect automatically select the checkbox to enable auto-start of the connection upon the boot-up of the access point . Username a username (login) to access the internet. Without aut...
Page 148
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description static ip address fill in the field if you want to use a static ip address to access the internet. Ppp debug select the checkbox if you want to log all data on ppp connection debugging. I...
Page 149: Lan
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) lan to configure the access point's local interface, proceed to the net / lan page. Figure 117. Basic settings of the local interface. If needed, edit the basic settings of the local interface. Parameter descr...
Page 150
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description dns relay select the checkbox so that the devices connected to the access point obtain the address transmitted by the isp or specified on the advanced / dns page as the dns server address...
Page 151
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) existing mac-ip pairs are displayed in the table of the static dhcp section. To remove a pair, select the checkbox in the relevant line in the table and click the remove button. Then click the save button. Pag...
Page 152: Wi-Fi
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) wi-fi in this menu you can specify all needed settings for your wireless network. Common settings on the wi-fi / common settings page, you can enable your wireless local area network (wlan) and split it into p...
Page 153: Basic Settings
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) basic settings on the wi-fi / basic settings page, you can configure basic parameters of the device's wlan. Figure 121. Basic settings of the wireless lan. Page 153 of 212.
Page 154
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description hide access point if the checkbox is selected, other users cannot see your wi-fi network. (it is recommended not to select this checkbox in order to simplify initial configuration of your...
Page 155: Security Settings
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) security settings on the wi-fi / security settings page, you can modify security settings of the wlan. Figure 122. The default security settings. By default, the open network authentication type with no encryp...
Page 156
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 123. Network authentication types supported by the access point. The access point supports the following authentication types: authentication type description open open authentication (with wep encrypti...
Page 157
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) when the open or shared value is selected, the wep encryption settings section is displayed (the section is unavailable for the wireless network operating modes which support the standard 802.11n): figure 124....
Page 158
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) when the wpa-psk or wpa2-psk value is selected, the wpa encryption settings section is displayed: figure 125. The wpa2-psk value is selected from the network authentication drop-down list. Parameter descriptio...
Page 159: Mac Filter
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) mac filter on the wi-fi / mac filter page, you can define a set of mac addresses of devices which will be allowed to access the wlan, or define mac addresses of devices which will not be allowed to access the ...
Page 160
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 127. The tab for adding a mac address. Enter an address in the mac address field of the mac address adding section and click the add button. To remove a mac address from the list of mac addresses, selec...
Page 161: Station List
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) station list on the wi-fi / station list page, you can view the list of wireless clients connected to the access point. Devices connected to the access point via the wds function are not displayed in the list....
Page 162: Wps
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) wps on the wi-fi / wps page, you can enable the function for secure configuration of the wlan and select a method used to easily add wireless devices to the wlan. The wps function helps to configure the protec...
Page 163
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) to activate the wps function, select the wps enable checkbox and click the change button. When the checkbox is selected, the information and connection sections are available on the page. Parameter description...
Page 164
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) using wps function via web-based interface to add a wireless device via the pin method of the wps function, follow the next steps: 1. Select the wps enable checkbox. 2. Click the change button. 3. Select the p...
Page 165
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) later you will be able to add wireless devices to the wlan by pressing the wps/reset button of the access point. 1. Select the pbc method in the software of the wireless device that you want to connect to the ...
Page 166: Wds
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) wds on the wi-fi / wds page, you can enable the wds function and select a mode of this function. The wds function allows joining local area networks together via a wireless connection of access points. Figure ...
Page 167
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) the following fields are available on the page: parameter description wds mode the wds function mode. Disable: the function is disabled. Bridge mode: access points communicate to each other only, wireless devi...
Page 168: Additional Settings
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) additional settings on the wi-fi / additional settings page, you can define additional parameters for the wlan of the access point. ! Changing parameters presented on this page may negatively affect your wlan!...
Page 169
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description tx power the transmit power (in percentage terms) of the access point. Bg protection the 802.11b and 802.11g protection function is used to minimize collisions between devices of your wir...
Page 170: Wmm
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) wmm on the wi-fi / wmm page, you can enable the wi-fi multimedia function. The wmm function implements the qos features for wi-fi networks. It helps to improve the quality of data transfer over wi-fi networks ...
Page 171
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) for every access category the following fields are available: parameter description aifsn arbitrary inter-frame space number. This parameter influences time delays for the relevant access category. The lower t...
Page 172: Client
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) client on the wi-fi / client page in the router mode, you can configure the device as a client to connect to a wisp access point. The “client” function in the router mode allows using dap-1360 as a wisp repeat...
Page 173
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 134. The page for configuring the client mode. To configure the access point as a client, select the enable client checkbox. When the checkbox is selected, the following fields are displayed on the page...
Page 174
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) when the open or shared authentication type is selected, the following fields are available: parameter description enable encryption wep the checkbox activating wep encryption. When the checkbox is selected, t...
Page 175: Advanced
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) advanced in this menu you can configure advanced settings of the access point switched to the router mode: • enable the upnp function • configure a ddns service • add name servers • define static routes • crea...
Page 176: Upnp
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) upnp on the advanced / upnp page, you can enable and disable the upnp function. Upnp is a set of networking protocols designed for automatic configuration of network devices. The upnp function performs automat...
Page 177: Ddns
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) ddns on the advanced / ddns page, you can define parameters of the ddns service, which allows associating a domain name with dynamic ip addresses. Figure 136. The advanced / ddns page. To add a new ddns servic...
Page 178
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 137. The page for editing the ddns service. You can specify the following parameters: parameter description ddns service select a ddns provider from the drop-down list. Host name the domain name registe...
Page 179: Dns
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) dns on the advanced / dns page, you can add dns servers to the system. Figure 138. The advanced / dns page. Dns servers are used to determine the ip address from the name of a server in intranets or the intern...
Page 180: Routing
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) routing on the advanced / routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system. Fig...
Page 181
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 140. The page for adding a static route. You can specify the following parameters: parameter description destination network a destination network to which this route is assigned. Destination netmask th...
Page 182: Remote Access
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) remote access on the advanced / remote access page, you can configure access to the web-based interface of the access point. By default, the access from external networks to the access point is closed. If you ...
Page 183
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 142. The page for adding a rule for remote management. You can specify the following parameters: parameter description ip address a host or a subnet to which the rule is applied. To choose a device conn...
Page 184: Igmp
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) igmp on the advanced / igmp page, you can enable igmp for the access point. Igmp is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resour...
Page 185: Firewall
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) firewall in this menu you can configure the firewall of the access point switched to the router mode: • add rules for ip filtering • create virtual servers • define a dmz • configure the mac filter. Ip filters...
Page 186
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 145. The page for adding a rule for ip filtering. You can specify the following parameters: parameter description ip filter rule editing name a name for the rule for easier identification. Protocol a pr...
Page 187
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description source the source host/subnet ip address. If the ip address range checkboxis selected, specify the starting ip address of the range in the source (first) field and the ending ip address i...
Page 188: Virtual Servers
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) virtual servers on the firewall / virtual servers page, you can create virtual servers for redirecting incoming internet traffic to a specified ip address in the local area network. Figure 146. The firewall / ...
Page 189
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 147. The page for adding a virtual server. You can specify the following parameters: parameter description template select a virtual server template from the drop-down list, or select custom to specify ...
Page 190
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) parameter description private ip the ip address of the server from the local area network. To choose a device connected to the access point's lan at the moment, select the relevant value from the drop-down lis...
Page 191: Dmz
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) dmz a dmz is a host or network segment located “between” internal (local) and external (global) networks. In the access point, the dmz implements the capability to transfer a request coming to a port of the ac...
Page 192: Mac Filter
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) mac filter on the firewall / mac filter page, you can configure mac-address-based filtering for computers of the device's lan. Figure 149. The firewall / mac filter page. To specify a new address for the mac f...
Page 193
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 150. The page for adding an address for the mac filter. On the opened page, enter the mac address of the device from the access point's lan in the mac address field. To choose a device connected to the ...
Page 194: Control
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) control this menu is designed to create restrictions on access to certain web sites. Url filter on the control / url filter page, you can specify restrictions on access to certain web sites. Figure 151. The co...
Page 195
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) figure 152. The control / url filter page. The url addresses tab. On the opened page, specify the needed parameters. Figure 153. The page for adding an address for the url filter. Enter a url address in the ur...
Page 196
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) to remove an address from the list of url addresses, select the relevant address in the table on the url addresses tab and click the delete button. To disable the url filter, deselect the enable/disable url fi...
Page 197: System
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) system in this menu you can do the following: • change the password used to access the access point's settings • save the current settings to the non-volatile memory • create a backup of the access point's con...
Page 198: Administrator Password
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) administrator password on the system / administrator password page, you can change the password for the administrator account used to access the web-based interface of the access point and to access the device...
Page 199: Configuration
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) configuration on the system / configuration page, you can save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the device's configura...
Page 200
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) the following buttons are available on the page: control description save click the button to save settings to the non-volatile memory. Please, save settings every time you change the device's parameters. Othe...
Page 201: System Log
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) system log on the system / system log page, you can set the system log options and configure sending the system log to a remote host. Figure 156. The system / system log page. The configuration tab. To enable ...
Page 202
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) control description port a port of the host specified in the server field. By default, the value 514 is specified. After specifying the needed parameters, click the change button. To disable logging of the sys...
Page 203: Firmware Upgrade
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) firmware upgrade on the system / firmware upgrade page, you can upgrade the firmware of the access point. ! Upgrade the firmware only when the access point is connected to your pc via a wired connection. Figur...
Page 204
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) 6. Select the factory line in the top-page menu displayed when the mouse pointer is over the system caption. 7. Wait until the access point is rebooted. Log into the web-based interface, using the default ip a...
Page 205: Ntp Client
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) ntp client on the system / ntp client page, you can configure automatic synchronization of the system time with a time server on the internet. Figure 159. The system / ntp client page. To enable automatic sync...
Page 206: Ping
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) ping on the system / ping page, you can check availability of a host from the local or global network via the ping utility. The ping utility sends echo requests to a specified host and receives echo replies. F...
Page 207: Traceroute
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) traceroute on the system / traceroute page, you can define the route of data transfer to a host via the traceroute utility. Figure 161. The system / traceroute page. To define the route, enter the name or ip a...
Page 208: Telnet
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) telnet on the system / telnet page, you can enable or disable access to the device settings via telnet from your lan. By default, access is enabled. Figure 162. The system / telnet page. To disable access via ...
Page 209: Device Mode
Dap-1360 wireless n 300 access point & router user manual configuring device (router mode) device mode on the system / device mode page, you can change the operating mode of the device. Figure 163. The page for changing the operating mode of the device. To switch the device to the other mode, select...
Page 210: Safety Instructions
Dap-1360 wireless n 300 access point & router user manual operation guidelines chapter 6. Operation guidelines safety instructions place your access point on a flat horizontal surface or mount the access point on the wall (the mounting holes are located on the bottom panel of the device). Make sure ...
Page 211
Dap-1360 wireless n 300 access point & router user manual abbreviations and acronyms chapter 7. Abbreviations and acronyms ac access category aes advanced encryption standard arp address resolution protocol bssid basic service set identifier cck complementary code keying crc cyclic redundancy check ...
Page 212
Dap-1360 wireless n 300 access point & router user manual abbreviations and acronyms pppoe point-to-point protocol over ethernet pptp point-to-point tunneling protocol psk pre-shared key qos quality of service radius remote authentication in dial-in user service rip routing information protocol rts ...