D-Link DAP-2330 v 1.0 Quick install manual - Dap-2330 Install Guide
Other manuals for DAP-2330 v 1.0:
Quick Installation Manual
Manual is about: Wireless AC1200 Concurrent Dual Band PoE Access Point
of
16
2
DAP-2330 Install Guide
Hardware Overview
LEDs
1
Connections
1
Power/Status
Solid Red
Indicates the access point has malfunctioned.
Blinking Red
This LED will blink during boot-up.
Solid Green
Indicates that the DAP-2330 is working properly.
Blinking Green This light will blink green during data transmission.
2
Power Receptor Connect the supplied power adapter.
3
LAN (PoE) Port
Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable.
4
Reset Button
Press and hold for five seconds to reset the access point to the factory default settings. Press and
hold for one second to reboot the access point.
4
2
3