D-Link DAP-2330 v 1.0 Quick install manual - Dap-2330 Install Guide
Other manuals for DAP-2330 v 1.0:
Quick Installation Manual
Manual is about: Wireless AC1200 Concurrent Dual Band PoE Access Point
of
16
DAP-2330 Install Guide
3
Hardware Setup
To power the access point, you can use one of the following 3 methods:
Method 1 - Use if you have a PoE switch or router.
Method 2 - Use if you do not have a PoE switch or router and do not have a
power outlet near the location of the access point.
Method 3 - Use if you do not have a PoE switch or router and have a power
outlet near the location of the access point.
DAP-2330
PoE Switch or Router
Method 1 - PoE with PoE Switch or Router
1. Connect one end of your Ethernet cable to the LAN (PoE) port on the access point.
2. Connect the other end into one port on a PoE switch or router.