D-Link DAP-2330 v 1.0 Quick install manual - Dap-2330 Install Guide
Other manuals for DAP-2330 v 1.0:
Quick Installation Manual
Manual is about: Wireless AC1200 Concurrent Dual Band PoE Access Point
of
16
4
DAP-2330 Install Guide
Method 2 - PoE without PoE Switch or Router
1. Connect one end of an Ethernet cable into the
Data In port on the PoE base unit and the
other end into one port on your switch, router, or computer.
2. Connect one end of an Ethernet cable into the
P+Data Out port on the PoE base unit and
the other end into the LAN (PoE) port on the Access Point.
3. Use the supplied power adapter. Connect the power adapter to the
Power In receptor on
the PoE adapter.
4. Connect the power cable to the power adapter and then connect the other end into a
power outlet.