2 dap-3320 install guide • cd-rom drive • computers with windows®, macintosh®, or linux-based operating systems with cd-rom drive • installed ethernet adapter • internet explorer 8, chrome, firefox, or safari 5.1 or higher note: to power the unit, use a d-link poe switch or the d-link dpe-301gi poe ...
Dap-3320 install guide 3 1 reset button press and hold for six seconds to reset the access point to the factory default settings. The led will turn on for two seconds and then begin the reboot process. 2 power led a solid green light indicates the device is powered and operational. 3 lan (poe) port ...
4 dap-3320 install guide before you begin this product should only be installed by an experienced installer who is familiar with local building and safety codes and, where applicable, is licensed by the appropriate authorities. Failure to employ an experienced installer may render the d-link product...
Dap-3320 install guide 5 installation 1. Lift the release tab in the middle of the cover, then pull the cover off. 2. Connect an ethernet cable (not included) to the ethernet port..
6 dap-3320 install guide 3. Use the grounding screw to attach the grounding wire. 4. Reattach the cover. You may need to break off one of the plastic port covers to allow your cables to exit the ap..
Dap-3320 install guide 7 mounting the dap-3320 supports the ip55 water/dustproof standard. It is recommended that you place the ap under a roof, shelter, or weatherproof container in severe weather environments. It is highly recommended that you configure and test your access point before mounting i...
8 dap-3320 install guide wall mount screw the wall mounting bracket into the wall, then attach the access point to it. For extra security, you can thread the plastic mounting ties through the back of the access point and the wall mounting bracket as shown..
Dap-3320 install guide 9 connect to your network you can connect the dap-3320 to a poe switch, or you can use a poe injector to power the ap. Connecting to a poe switch connect the ethernet cable that is connected to the dap-3320 to your poe switch. Dap-3320 poe switch.
10 dap-3320 install guide connecting to the poe injector 1. Connect the ethernet cable that is connected to the dap-3320 to the p+data out port on the poe injector. 2. Connect an ethernet cable to the data in port on the poe injector. Connect the other end of the ethernet cable to your network switc...
Dap-3320 install guide 11 step 2: at the login screen, enter admin for the user name and leave the password blanks. Click login to continue. Step 3: after the home page appears, go to basic settings > lan to change the ip settings of the dap-3320. Go to basic settings > wireless to configure your wi...
Technical support d-link’s website contains the latest user documentation and software updates for d-link products. U.S. And canadian customers can contact d-link technical support through our website or by phone. United states telephone (877) 354-6555 world wide web http://support.Dlink.Com canada ...
