Dap-3520 airpremier n poe exterior access point using a power adapter with a different voltage rating will damage and void the warranty of this product. System requirements minimum system requirements: • cd-rom drive • computers with windows ® , macintosh ® , or linux-based operating systems • insta...
Before you begin it’s best to use a computer (with an ethernet adapter) connected to a switch to configure the dap-3520. The default ip address for the dap-3520 is 192.168.0.50 with a subnet mask of 255.255.255.0 on the wired ethernet side. You will need to assign your computer a static ip address w...
Physical installation connect the supplied ethernet cable with the waterproof enclosure to the ethernet port on the dap-3520 and attach the grounding wire..
Step 1: insert provided wall anchors in the wall where the mounting plate will be attached. Mounting plate assembly step 2: use the provided screws to secure the mounting plate on the wall..
Step 3: attach the remaining screws securely to the back of the dap-3520. Step 4: attach the dap-3520 to the mounting plate..
Step 5: slide the dap-3520 down into the grooves on the mounting plate to secure it to the plate..
Installing the hardware step 1 step 2 connect one end of an ethernet cable (included with your package) to the lan port on the dap-3520 and the other end of the ethernet cable to the port labeled p+data out on the poe base unit. Connect another ethernet cable from the data in port on the poe base un...
When you have completed the steps in this installation guide and configured your dap-3520 for your network, your network should look similar to this:.
10 notes.
11 notes.
1 technical support d-link’s website contains the latest user documentation and software updates for d-link products. U.S. And canadian customers can contact d-link technical support through our website or by phone. United states telephone (877) 354-6555 world wide web http://support.Dlink.Com canad...
