D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access Point Install Manual - Installing The Hardware
Other manuals for DAP-3520 - AirPremier N Dual Band Exterior PoE Access Point:
User Manual, Command Line Interface Reference Manual, Quick Installation Manual, User manual, Quick Installation Manual
Manual is about: Dual Band Exterior PoE Access Point
of
12
Installing the Hardware
Step 1
Step 2
Connect one end of an Ethernet cable (included with your package) to the
LAN port on the DAP-3520 and the other end of the Ethernet cable to the
port labeled P+DATA OUT on the PoE base unit.
Connect another Ethernet cable from the DATA IN port on the PoE base unit
to your router/switch or to a PC.
Attach the power adapter to the connector labeled POWER IN on the PoE
base unit. Attach the power cord to the power adapter and into an electrical
outlet.
Step 3
Power over Ethernet (PoE) Setup