Before you start 1 local cable service if you do not have an existing cable internet connection, contact your local cable operator to subscribe to a broadband connection. For the modem to be recognized on the network of the cable internet provider, the following modem information will be needed: mod...
2 . Connecting the cable modem continued… connect the coaxial cable provided for the internet connection to the jack labeled “cable in” in the back of the cable modem unit. Wait 1 to 3 minutes for the link light to illuminate. If the link light does not glow, please contact your broadband cable comp...
3 connecting the cable modem continued… c. The final cable modem setup will look like the figures below: ethernet cable connection usb cable connection or *note: when using the usb cable connection, make sure the link light is on in front of the modem before you connect the usb type a to your comput...
4 verifying the modem status lights status indicator link light activity light power indicator verify the cable modem connections using the led indicators power: on after the modem has been plugged into an ac power source. Link: on when the connection to the cable network is established. The link li...
5 installing the usb drivers *note: this installation is only necessary if you are using the usb cable to connect your cable modem to the computer. Windows 98/98 se if your pc is running windows 98/98se, it should detect the new hardware automatically. However, if it does not, please follow the step...
6 windows 98/98 se continued… select “search for the best driver for your device (recommended).” and then click next. Check (√) “cd-rom drive” and then click next..
7 windows 98/98 se continued… select “the updated driver (recommended) d-link usb cable modem” and then click next. Click next..
8 windows 98/98 se continued… if a warning message as the following appears, insert the installation disk and click ok. Indicate the location of driver by typing a:\ in the space of “copy files from:” click ok to allow windows to install the driver for your usb cable modem. He be e once the necessar...
9 windows 98/98 se continued… click finish to complete the driver installation procedure. The dcm-200 is now installed. . Before you can begin using the dcm-200 usb/ethernet cable modem, you must reboot your pc. Click “yes” to proceed with this operation.
10 windows me (millennium edition) if your pc is running windows me, it will automatically detect the new hardware through a series of windows displayed below. Follow the steps described below to add the driver for the usb/ethernet cable modem. Once the usb cable is connected to the usb interface, t...
11 windows me (millennium edition) continued… the following window will appear: once the necessary driver files have been copied, the following window will be displayed. In the event of a version conflict, we recommend keeping all previous versions. Click finish to complete the driver installation p...
Windows 2000 if your pc is running windows 2000, it will automatically detect the new hardware through a series of windows displayed below. Follow the steps described below to add the driver for the usb/ethernet cable modem. Once the usb cable is connected to the usb interface, the following window ...
Windows 2000 continued… check (√) “cd-rom drives” and then click next. Click next to allow windows to install the driver for your dmc-200 usb/ethernet cable modem. 13.
Windows 2000 continued… d-link usb cable modem click yes to continue. 14 00 sb/ethernet ust d-link usb cable modem click finish to complete the driver installation procedure. The dcm-2 is now installed. Please note that before you can begin using the dcm-200 u cable modem, you m reboot your pc..
15 est your internet connection open the web browser to your favorite site. * your cable service you our t provider will provide with the proper instructions on y network setup..
16 d-link ® digital home solutions printed in taiwan version 2.0