Before you start modem ma onnecting the cable modem local cable service please contact your cable internet provider to find out the procedure to register the modem with their network. The cable internet provider will need the following modem information: modem make and model i.E. D-link dcm-200 mode...
Connecting the cable modem continued… connect the coaxial cable provided for the internet connection to the jack labeled “cable in” in the back of the cable modem unit. Wait 1 to 3 minutes for the status light to illuminate. If the status led does not turn “on,” please contact your broadband cable c...
Connecting the cable modem continued… the final cable modem setup will look like the figures below: ethernet cable connection usb cable connection or *note: when using the usb cable connection, make sure the status light located at the front of the modem is “on” (not blinking) before connecting the ...
Verifying the modem status lights power indicator activity light link light status indicator verify the cable modem connections using the led indicators power: the power led will be “on” after the modem has been plugged into an ac power source. Link: the link led will be “on” when the connection fro...
5 installing the usb drivers *note: this installation is only necessary if you are using the usb cable to connect your cable modem to the computer. Windows xp driver installation when your computer is running windows xp, once the usb cable is connected to the usb interface, the following window will...
Windows xp continued… if this hardware installation window shows, please note that d-link is in the process of obtaining windows logo testing certification. Click on continue anyway please wait while the drivers are copied onto your computer. 6.
Windows xp continued… click finish to complete the driver installation procedure. The dcm-200 is now installed. Please note that before you can begin using the dcm-200 usb/ethernet cable modem, you must restart your computer. Windows 2000 driver installation if your computer is running windows 2000,...
Windows 2000 continued… 8 click next. Select “search for a suitable driver for my device (recommended)” and then click next..
Windows 2000 continued… select “floppy disk drive.” insert the “floppy disk.” click next. Click next to allow windows to install the driver for your dmc-200 usb/ethernet cable modem. 9.
Windows 2000 continued… d-link usb cable modem d-link usb cable modem click yes to continue. Click finish to complete the driver installation procedure. The dcm-200 is now installed. Please note that before you can begin using the dcm-200 usb/ethernet cable modem, you must restart your computer. 10
Windows me driver installation if your computer is running windows me, the following window will be displayed after the usb cable is connected to the usb interface: if the above window does not appear, then go to start>settings>control panel>add new hardware. The following window will appear. Select...
Windows me (millennium edition) continued… the following window will appear: once the necessary driver files have been copied, the following window will be displayed. In the event of a version conflict, we recommend keeping all previous versions. Click finish to complete the driver installation proc...
Windows me (millennium edition) continued… click next. Est e select “search for the b driver for your devic (recommended).” and then click next. 13.
Windows 98/98 se continued… 14 nd select “floppy disk drives.” insert the driver diskette into your floppy drive a then click next. Select “the updated driver (recommended) d-link usb cable modem” and then click next..
Windows 98/98 se continued… click next. Nstalled. Once the necessary driver files have been copied, the following window will be displayed. In the event of a version conflict, we recommend keeping all previous versions. Click finish to complete the driver installation procedure. The dcm-200 is now i...
16 windows 98/98 se continued… efore em, you u open the web browser to your favorite site. B you can begin using the dcm-200 usb/ethernet cable mod st restart your computer. Click “yes” to complete the installation. M test your internet connection * your cable service provider will provide you with ...
