D-Link DES-1008FX User Manual - Setup

6

Unpacking and Setup

Setup

The setup of the Switch can be performed using the following

steps:

♦

The surface must support at least 3 Kg.

♦

The power outlet should be within 1.82 meters (6 feet) of the

device.

♦

Visually inspect the power cord and see that it is secured

fully to the AC power connector.

♦

Make sure that there is proper heat dissipation from and

adequate ventilation around the Switch.  Do not place heavy

objects on the Switch.

Desktop or Shelf Installation

When installing the Switch on a desktop or shelf, the rubber feet

included with the device must be first attached.  Attach these

cushioning feet on the bottom at each corner of the device.  Allow

enough ventilation space between the device and the objects

around it.