D-Link DES-1008FX User Manual - Led Indicators

12

Identifying External Components

circulation, system components might overheat, which could

lead to system failure.

♦

Duplex Mode Switch.    This bank of eight switches

changes the ports between full and Half-Duplex modes. The

switches are ordered reverse to the front panel ports.

Example front port 1 is switch 8. Half-Duplex is "DOWN" or

"ON". Full-Duplex is "UP" or "OFF". Default settings for the

DES-1008FX are all "DOWN/ON" at Half-Duplex.

♦

AC Power Connector.   This is a three-pronged connector

that supports the power cord.  Plug in the female connector

of the provided power cord into this connector, and the male

into a power outlet.  Supported input voltages range from

100 ~ 240 VAC at 50 ~ 60 Hz.

♦

Power Switch.  This turns the Switch on and off.  To turn

on the system, press the switch to the “1” position; to turn

off, press the switch to the “0” position.

LED Indicators

The LED indicators of the Switch include Power, Link, Act, FDX

and Col.  The following shows the LED indicators for the Switch

along with an explanation of each indicator.

 Figure 5.  The DES-1008FX Switch LED indicators