D-Link DES-1008FX User Manual - Power On

8

Unpacking and Setup

 Figure 2A.   Attaching the mounting brackets to the DES-1008FX

100Mbps Fast Ethernet Switch

Then, use the screws provided with the equipment rack to mount

the Switch in the rack.

 Figure 2B.   Installing the DES-1008FX 100Mbps Fast Ethernet

Switch in an equipment rack

Power on

The DES-1008FX Switch can be used with AC power sources 100 -

240 VAC, 50 - 60 Hz. The power switch is located at the rear of the

unit adjacent to the AC power connector and the system fan. The

Switch’s power supply will adjust to the local power source

automatically and may be turned on without having any or all

LAN segment cables connected.

After the power switch is turned on, the LED indicators should

respond as follows:

♦

The power LED indicator will turn on and remain ON. .