D-Link DES-1226G Quick Installation Manual

Other manuals for DES-1226G: Owner's Manual, Manual
Manual is about: Web-Smart 24-Port 10/100Mbps+2-Port Combo 10/100/1000Mbps Copper/SFP(Mini GBIC) Gigabit Switch

Summary of DES-1226G

  • Page 1

    Before your begin this quick installation guide gives step-by-step instructions for setting up the d-link des-1226g web-smart gigabit ethernet switch. The model you have purchased may appear slightly different from those shown in the illustrations. For more detailed information about the switch, its...

  • Page 2: Switch

    2 setup the des-1226g gigabit smart switch the setup of the switch can be performed using the following steps: a. Install the des-1226g in a fairly cool and dry place. See technical specification for the acceptable operation temperature and humidity ranges. B. Install the des-1226g in a site free fr...

  • Page 3: Switch to Your Network

    3 mount the switch in the rack connecting network cable the des-1226g supports 10/100/1000mbps gigabit ethernet. It runs full/half duplex transfer mode for 10/100mbps and full duplex transfer mode for 1000mbps. Each port on the des-1226g supports auto- mdi/mdi-x. Auto-mdi/mdi-x is a feature that eli...

  • Page 4: Led Indicators

    4 n 10/100base-tx twisted-pair ports (port1~24) these ports support network speeds of either 10mbps or 100mbps, and can operate in half- and full- duplex transfer modes. These ports also support automatic mdi/mdi-x crossover detection, giving true “plug and play” capability. Just plug the network ca...

  • Page 5: N  Ports 1-24 Status Leds

    5 n cpu leds ( management indicator) blinking when the cpu is working, the system led is blinking. On/off the cpu is not working. N ports 1-24 status leds link/act on when the led light is on, the respective port is connected to the 10/100mbps ethernet network. Blinking when the led light is blinkin...

  • Page 6: Utility

    6 n option ports 25~26 mini-gbic status leds link/act on : when the mini-gbic module is installed and connected to a network, the link/act led lights on. Blinking : when the led is blinking, the mini-gbic module is receiving data on a network. Off : no link. 1000mbps on : when the 1000mbps led light...

  • Page 7: Configuring The Switch

    7 configuring the switch the des-1226g has a web gui interface for smart switch configuration. The switch can be configured through the web browser. A network administrator can manage, control and monitor the switch from the local lan. This section indicates how to configure the switch to enable its...

  • Page 8: Setup Menu

    8 after entering the password, the main page comes up, the screen will display the device status. (figure 4.) figure 4. Setup menu when the main page appears, find the setup menu in the left side of the screen (figure 5). Click on the setup item that you want to configure. There are eleven options: ...