D-Link DES-1226G Quick Installation Manual - Utility
6
n Option Ports 25~26 mini-GBIC Status LEDs
Link/Act
On
: When the mini-GBIC module is installed and
connected to a network, the Link/ACT LED lights on.
Blinking : When the LED is blinking, the mini-GBIC module is
receiving data on a network.
Off
: No link.
1000Mbps
On
: When the 1000Mbps LED lights on, the respective
port is connected to a 1000Mbps Gigabit Ethernet
network.
Off
: When the respective port is disconnected to the
network
Installing the Web Management
Utility
Through the Web Browser you can configure the Switch such as VLAN,
Trunking, QoS… etc.
The following instruction guides you to install the Web Management
utility.
1.
Insert the Utility CD in the CD-Rom Drive.
2.
From the Start menu on the Windows desktop, choose Run.
3.
In the Run dialog box, type D:\Web Management Utility\setup.exe
(D:\ depends where your CD-Rom drive is located) and click OK.
4.
Follow the on-screen instructions to install the utility.
5.
Upon completion, go to Program Files ->
web_management_utility and execute the Web Management
utility. (Figure 1.)
Figure 1. Web Management Utility