D-Link DES-1226G Quick Installation Manual - Switch to Your Network
3
Mount the Switch in the rack
Connecting Network Cable
The DES-1226G supports 10/100/1000Mbps Gigabit Ethernet. It runs
full/half duplex transfer mode for 10/100Mbps and full duplex transfer
mode for 1000Mbps. Each port on the DES-1226G supports Auto-
MDI/MDI-X. Auto-MDI/MDI-X is a feature that eliminates the need for
worrying about using either a standard or crossover cable— you can
use either one— and allows any port to be an uplink port.
AC Power
The DES-1226G can be used with AC power supply 100~240V AC,
50~60Hz. The power switch is located at the rear of the unit adjacent to
the AC power connector and the system fan. The switch’s power supply
will adjust to the local power source automatically and may be turned on
without having any or all LAN segment cables connected.
Connect The DES-1226G Gigabit Smart
Switch To Your Network
Front Panel
10/100 Base-TX Twisted-Pair Ports Mini GBIC Ports
┌─────────────┐ ┌──┐
└─────┘ └──┘
LED Indicators 1000 Base-T Twisted-
Pair Ports