1. DL manuals
  2. D-Link
  3. Switch
  4. DES-1250G
  5. Quick Installation Manual

D-Link DES-1250G Quick Installation Manual

Other manuals for DES-1250G: Manual
Manual is about: Web Smart 48-Port 10/100Mbps+2-Port Combo 10/100/1000Mbps Copper/SFP(Mini GBIC) Gigabit Switch

Summary of DES-1250G

  • Page 1

    Before your begin this quick installation guide gives step-by-step instructions for setting up the d-link des-1250g web-smart switch. The model you have purchased may appear slightly different from those shown in the illustrations. For more detailed information about the switch, its components, maki...

  • Page 2: Setup The Des-1250G Switch

    2 setup the des-1250g switch the setup of the switch can be performed using the following steps: a. Install the des-1250g in a fairly cool and dry place. See the technical specifications for the acceptable operation temperature and humidity ranges. B. Install the des-1250g in a site free from strong...

  • Page 3: Switch to Your Network

    3 mount the switch in the rack connecting network cable the des-1250g supports 2 ports of 10/100/1000mbps gigabit ethernet. It runs full-/half- duplex transfer mode for 10/100mbps and full-duplex transfer mode for 1000mbps. Each port on the des- 1250g supports auto-mdi/mdi-x. Auto-mdi/mdi-x is a fea...

  • Page 4: Led Indicators

    4 10/100base-tx twisted-pair ports (port1~48) these ports support network speeds of either 10mbps or 100mbps, and can operate in half- and full- duplex transfer modes. These ports also support automatic mdi/mdi-x crossover detection, giving true “plug and play” capability. Just plug the network cabl...

  • Page 5: Ports 1-48 Status Leds

    5 cpu leds ( management indicator) blinking when the cpu is working, the system led is blinking. On/off the cpu is not working. Ports 1-48 status leds link/act: on when the led light is on, the respective port is connected to the 10/100mbps ethernet network. Blinking when the led light is blinking, ...

  • Page 6: Utility

    6 installing the web management utility through the web browser you can configure switch functions such as vlan, trunking, qos… etc. The following instruction guides you to install the web management utility. 1. Insert the utility cd in the cd-rom drive. 2. From the start menu on the windows desktop...

  • Page 7: Login

    7 login before you configure this device, note that when the web smart switch is configured through an ethernet connection, make sure the manager pc must be set on the same ip network. For example, when the default network address of the default ip address of the web smart switch is 192.168.0.1, the...

  • Page 8: Setup Menu

    8 figure 4. Setup menu when the main page appears, find the setup menu on the left side of the screen (figure 5). Click on the setup item that you want to configure. There are eleven options: port settings, vlan settings, trunk setting, mirror setting, device status, system settings, trap setting, p...

  • Page 9

    9.

  • Page 10: Technical Support

    10 technical support you can find software updates and user documentation on the d-link website. D-link provides free technical support for customers within the united states and within canada for the duration of the warranty period on this product. U.S. And canadian customers can contact d-link tec...