D-Link DES-3226 User Manual - Switch Information
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Switch Information
Figure 7-2. Switch Information (Basic Settings) window
To set basic switch settings, enter a System Name in the first field, the physical location of the Switch
in the System Location field, and the name of the contact person responsible for the Switch in the
System Contact field. Then click Apply.
The information is described as follows:
• Device Type – A description of the Switch type.
• External Module Type – Description of optional module plugged into front slot.
• MAC Address – The Ethernet address for the device.
• Boot PROM Version – Version number for the firmware chip. This information is needed for
new runtime software downloads.
• Firmware Version – Version number of the firmware installed on the Switch. This can be
updated by using the Update Firmware window in the Reset and Update section.
• Base Module Version – Version number of the base module.
• External Module Version – Version of optional module plugged into front slot.
• System Name – A user-assigned name for the Switch.
• System Location – A user-assigned description for the physical location of the Switch.
• System Contact – Name of the person to contact should there be any problems or questions
with the system. You may also want to include a phone number or extension.
92