D-Link DES-3226 User Manual - page 98
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
• Save Configuration & Reboot – Saves the configuration to NV-RAM (identical to using Save
Changes) and then restarts the Switch.
• Reboot & Load Factory Default Configuration – Restarts the Switch using the default factory
configuration. All configuration data will be lost. This is identical to using Factory Reset and then
Reboot.
• Reboot & Load Factory Default Configuration Except IP Address – Restarts the Switch using the
default factory configuration, except the user configured IP address will be retained. All other
configuration data will be lost.
A confirmation screen will appear:
Figure 6-73. System Reboot confirmation screen
To reboot the Switch, in the mode entered above, highlight Yesand press Enter.
88