D-Link DES-3226 User Manual - Snmp Manager Configuration
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
The information on this screen is described as follows:
• Radius Server IP Addr – The remote RADIUS server IP address.
• UDP Port – The UDP socket port numbers of the RADIUS server.
• Timeouts – The counter of timeouts from RADIUS authentication.
• Requests – The counter of access requests from RADIUS authentication.
• Challenges – The counter of access challenges from RADIUS authentication.
• Accepts – The counter for the number of acceptances from RADIUS authentication.
• Rejects – The counter for the number of rejections from RADIUS authentication.
Figure 6-64. Show Radius Accounting screen
This read-only field displays RADIUS Accounting information. To reset the statistics counters on this
screen, press CLEAR COUNTER. The polling interval can be set between 2 seconds and 1 minute using
the space bar.
The information on this screen is described as follows:
• Accounting Server IP Addr – The IP address of the RADIUS accounting server.
• UDP Port – The UDP socket port number of the RADIUS accounting server.
• Timeouts – The counter of the timeout connections to the RADIUS accounting server.
• Requests – The counter of the requests from the RADIUS accounting server.
• Responses – The counter for the number of rejections from RADIUS accounting server.
SNMP Manager Configuration
The Switch sends out SNMP traps to network management stations whenever certain exceptional events
occur, such as when the Switch is turned on or when a system reset occurs. The Switch allows traps to
be routed to up to four different network management hosts.
82