2 d-link dge-530t quick install guide system requirements • a computer with an available 32-bit pci bus master slot operating at 33mhz • windows ® 2000, 2003, 2008, xp, vista ® , 7, linux 2.4.X and above, or mac os 10.2.X and above • 150mhz processor and at least 32mb of ram • 32mb free hard drive s...
2 3 d-link dge-530t quick install guide installation package contents system requirements if any of the above items are missing, please contact your reseller. Installation note: install the drivers before installing the adapter into your computer. Turn on your computer and insert the d-link dge-530t...
4 d-link dge-530t quick install guide installation once your computer is turned off, remove the power cable from the computer. Open the case and insert the d-link adapter into an available pci slot. Note: write down the serial number and hardware revision (e.G. B1) before installing the adapter. If ...
4 5 d-link dge-530t quick install guide installation once you boot your computer, windows ® will automatically install the drivers. Windows xp users: you will receive a bubble stating that windows found the dge-530t adapter. Windows ® 7/vista ® users: you will receive a bubble stating windows has fi...
6 d-link dge-530t quick install guide verify installation configure your adapter to verify that the drivers are installed, you may view device manager. To view the device manager, please follow the steps below: step 1: windows ® 2000: click on start > settings > control panel windows xp: click on st...
6 7 d-link dge-530t quick install guide configure your adapter configure your adapter after you install your new d-link adapter, by default, the tcp/ip settings should be set to obtain an ip address from a dhcp server (i.E router) automatically. To verify your ip address, please see the following st...
8 d-link dge-530t quick install guide configure your adapter if you are not using a dhcp capable gateway/router, or you need to assign a static ip address, please follow the steps below. Step 1: windows ® 2000: click on start > settings > control panel > network connections windows ® xp: click on st...
8 9 d-link dge-530t quick install guide configure your adapter set primary dns the same as the lan ip address of your router (192.168.0.1). The secondary dns is not needed or you may enter a dns server from your isp. Step 5: click ok twice to save your settings..
10 d-link dge-530t quick install guide notes notes.
10 11 d-link dge-530t quick install guide notes notes.
12 d-link dge-530t quick install guide technical support d-link’s website contains the latest user documentation and software updates for d-link products. U.S. And canadian customers can contact d-link technical support through our website or by phone. United states telephone (877) 453-5465 world wi...