D-Link DGS-1210 Series Reference Manual - page 101
5 Command Line Interface
D-Link Web Smart Switch User Manual
96
DGS-1210-28> show switch
System Name :
System Contact :
System Location :
System up time : 0 days, 6 hrs, 32 min, 17 secs
System Time : 02/01/2012 06:32:19
System hardware version : C1
System firmware version : 4.00.018
System boot version : 1.00.007
System serial number : QBDGS12102800
MAC Address : 00-12-10-03-03-03
DGS-1210-28>
config account admin password
Purpose
To display the configuration of an IP interface on the Switch.
Syntax
config account admin password
Description
The
config account admin password command sets the
administrator password.
Parameters
− The new password of the administrator.
Restrictions
None.
Example usage:
To configure the account admin password:
DGS-1210-28>
config account admin password 1234
DGS-1210-28>
save
Purpose
To save changes in the Switch’s configuration to non-volatile
RAM.
Syntax
save
Description
The
save command saves the configuration changes to the
memory.
Parameters
None.
Restrictions
None.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DGS-1210-28> save
Building configuration ...
[OK]