D-Link DGS-1210 Series Reference Manual - page 93
5 Command Line Interface
D-Link Web Smart Switch User Manual
88
Command
Parameter
show switch
config account admin
password
save
debug info
Each command is listed in detail, as follows:
?
Purpose
To display a list of commands.
Syntax
?
Description
The
? command displays a list of commands of the switch.
Parameters
None.
Restrictions
None.
Example usage:
To display a list of commands of the switch:
DGS-1210-28> ?
USEREXEC commands :
config account admin password
config ipif System { ipaddress
address> | dhcp }
debug info
download { firmware_fromTFTP tftp://ip-address/filename | cfg_fromTFTP
tftp://ip-address/filename }
logout
ping
reboot
reset config
save
show ipif
show switch
upload { firmware_toTFTP tftp://ip-address/filename | cfg_toTFTP tftp://ip-
address/filename }
DGS-1210-28>
download
Purpose
To download and install a firmware, boot, or switch configuration
file from a TFTP server.
Syntax
download { firmware_fromTFTP | cfg_fromTFTP } {